National Instruments NI-SCOPE Instrument Driver

Instrument Control Toolbox™ supports communication with instruments using instrument drivers or through SCPI commands over supported interfaces such as GPIB, TCP/IP, Serial, or VISA.

This links to an IVI^® instrument driver for use with Instrument Control Toolbox. This IVI driver is for use with NI oscilloscopes.

This IVI driver can be used with the IVI and VXIplug&play support package in R2022b and later. The IVI driver can also be used with the NI-FGEN support package in MATLAB^® releases R2022a and earlier.

For additional information visit Instrument Control Toolbox.