Generate Five-Phase Output from the Multiphase Clock Block
This example shows how to use the Multiphase Clock block to generate a 100 Hz five-phase output in which the third signal is first to become active. The block uses a high active level with a duration of one interval.
The Scope window below shows the output of the Multiphase Clock block. Note that the first active level appears at
y(3), the second active level appears at
y(4), the third active level appears at
y(5), the fourth active level appears at
y(1), and the fifth active level appears at
y(2). Each signal becomes active
1/(5*100) seconds after the previous signal.
- Multiphase Clock | Scope (Simulink)