Main Content

Model and simulate electronic, mechatronic, and electrical power systems

Simscape™
Electrical™ (formerly SimPowerSystems™ and SimElectronics^{®}) provides component libraries for modeling and simulating electronic,
mechatronic, and electrical power systems. It includes models of semiconductors, motors, and
components for applications such as electromechanical actuation, smart grids, and renewable
energy systems. You can use these components to evaluate analog circuit architectures,
develop mechatronic systems with electric drives, and analyze the generation,
conversion, transmission, and consumption of electrical power at the grid level.

Simscape
Electrical helps you develop control systems and test system-level performance. You can
parameterize your models using MATLAB^{®} variables and expressions, and design control systems for electrical systems
in Simulink^{®}. You can integrate mechanical, hydraulic, thermal, and other physical
systems into your model using components from the Simscape family of products. To deploy models to other simulation environments,
including hardware-in-the-loop (HIL) systems, Simscape
Electrical supports C-code generation.

Simscape Electrical was developed in collaboration with Hydro-Québec of Montreal.

Build a Simscape Electrical model and parameterize the blocks using datasheet values, run the model, and examine the results.

Build a model of a DC motor, modify the parameters, run the model, and examine the results.

**Build and Simulate Composite and Expanded Three-Phase Models**

Model a three-phase AC voltage source driving a simple load using Simscape Electrical.

**Build and Simulate a Simple Circuit**

Build a simple circuit using Simscape Electrical Specialized Power Systems blocks and connect it to other Simulink blocks.

Use the Powergui block to analyze static and frequency-domain response.

Specify initial conditions for state variables using the Simscape Electrical Specialized Power Systems powergui block.

**Simscape Electrical Block Libraries**

Use the Simscape Electrical block libraries to model and analyze electronics, mechatronics, and electrical power systems.

**Modeling Analog Circuit Architectures, Mechatronic Systems, and Electrical Power Systems Using Simscape Electrical**

Model mechatronic systems, analog circuit architectures, and single and multi-phase electrical power systems that you can connect to networks in other Simscape domains.

**Per-Unit System of Units**

Use the per-unit (pu) system to simplify electrical power system simulation calculations and analysis.