Main Content

Check length of bus and enumeration data type names

Check ID: mathworks.jmaab_v6.jc_0901

Guideline: jc_0901: Length restriction for Data Type definition

Description

Checks if the lengths of bus object names, bus element names, enumeration class names, and enumeration member names adhere to the minimum and maximum length restrictions specified by the input parameters.

The default minimum length is 1. The default maximum length is 63.

This check applies to the following target components defined in the base workspace, the model workspace, or the data dictionary:

  • Bus data type names

  • Enumeration data type names

This check requires a Simulink® Check™ license.

Check Parameterization

This check does not include sub-checks because the JMAAB modeling guideline provides only one sub ID.

For reference, the guideline sub ID(s) that are recommended for use by the JMAAB modeling standards organizations are:

  • JMAAB — a

You can configure the following input parameters to customize the check action:

Input ParameterValueDefault Value
Minimum length of Bus data nameMinimum length for a bus data type1
Maximum length of Bus data nameMaximum length for a bus data type63
Minimum length of Enumeration data nameMinimum length for a enumeration data type1
Maximum length of Enumeration data nameMaximum length for a enumeration data type63

Results and Recommended Actions

ConditionRecommended Action
Bus object names or bus element names in the model do not adhere to the minimum length restriction. Modify bus object names or bus element names so that their lengths are not less than the value specified by the Minimum length of Bus data name input parameter.
Bus object names or bus element names in the model do not adhere to the maximum length restriction.Modify bus object names or bus element names so that their lengths are not more than the value specified by the Maximum length of Bus data name input parameter.
Enumeration class names or enumeration member names do not adhere to the minimum length restriction. Modify enumeration class names or enumeration member names so that their lengths are not less than the value specified by the Minimum length of Enumeration data name input parameter.
Enumeration class names or enumeration member names do not adhere to the maximum length restriction. Modify enumeration class names or enumeration member names so that their lengths are not more than the value specified by the Maximum length of Enumeration data name input parameter.

Capabilities and Limitations

  • Analyzes content in masked subsystems.

  • Analyzes content of library-linked blocks.

  • Does not support exclusions of blocks or charts for bus object data type names.

  • Does not run on library models.