Supported Third-Party Tools and Hardware
Third-Party Synthesis Tools and Version Support
SoC Blockset™ supports these third-party FPGA synthesis tools:
Intel® Quartus® Prime Standard Edition 22.1
Xilinx® Vivado® Design Suite 2023.1
To use third-party synthesis tools with SoC Blockset, a supported synthesis tool must be installed, and the synthesis tool executable must be on the system path.
Third-Party Support for Software Generation
SoC Blockset supports this third-party software generation tool:
Intel SoC FPGA Embedded Development Suite (EDS) 18.0
Linux® Buildroot 2017.05.1
PetaLinux 2022.1
Supported Xilinx Devices
SoC Blockset supports execution on Xilinx devices shown in this table. The table also lists the supported add-on cards for these devices.
Device Family | Board | Add-On Card | Comments |
---|---|---|---|
Xilinx Artix®-7 | Artix-7 35T Arty FPGA Development Board | ||
Xilinx Kintex®-7 | Kintex-7 KC705 | ||
Xilinx Versal® | Versal AI Core Series VCK190 Evaluation Kit | Supported only with the IP core generation workflow, see SoC Generation Workflows. | |
Xilinx Zynq® | Zynq-7000 ZC702 | FMC-HDMI-CAM | Supported only with the IP core generation workflow, see SoC Generation Workflows. |
Zynq-7000 ZC706 | FMCOMMS2 | ||
FMCOMMS3 | |||
FMCOMMS4 | |||
FMCOMMS5 | |||
FMC-HDMI-CAM | |||
ZedBoard™ | FMCOMMS2 | ||
FMCOMMS3 | |||
FMCOMMS4 | |||
FMC-HDMI-CAM | |||
PicoZed™ | FMC-HDMI-CAM | Supported only with the IP core generation workflow, see SoC Generation Workflows. | |
Analog Devices® RF SOM | Supported only with the IP core generation workflow, see SoC Generation Workflows. | ||
Xilinx Zynq UltraScale+™ | Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit | FMCOMMS2 | |
FMCOMMS3 | |||
FMCOMMS4 | |||
FMC-HDMI-CAM | |||
Zynq UltraScale+ MPSoC ZCU106 Evaluation Kit | FMC-HDMI-CAM | ||
IMX274MIPI-FMC | |||
UVC USB 3.0 cameras | |||
Zynq UltraScale+ RFSoC ZCU111 Evaluation Kit | |||
Zynq UltraScale+ RFSoC ZCU208 Evaluation Kit | OTAVA DTRX2 | FTDI JTAG is not supported | |
Zynq UltraScale+ RFSoC ZCU216 Evaluation Kit |
Supported RFSoC Devices for RF Data Converter
SoC Blockset supports execution of the RF Data Converter block on Xilinx Zynq UltraScale+ RFSoC devices shown in this table.
Generation | Device |
---|---|
Gen 1 | ZU25DR |
ZU27DR | |
ZU28DR | |
ZU29DR | |
Gen 2 | ZU39DR |
Gen 3 | ZU47DR |
ZU48DR | |
ZU49DR |
Supported Intel Devices
SoC Blockset supports execution on Intel devices shown in this table.
Device Family | Board |
---|---|
Intel Arria® 10 | Arria 10 SoC Development Kit |
Intel Cyclone® V | Cyclone V SoC Development Kit |
SoC Board Support Packages
The SoC Blockset support packages contain the definition files for all supported boards. You can download one or more vendor-specific support packages. To generate executables and execute on hardware, download at least one of these packages.
To see the list of SoC Blockset support packages, visit SoC Blockset Supported Hardware. To download an SoC Blockset support package, on the MATLAB® Home tab, in the Environment section, click Add-Ons > Get Hardware Support Packages.
See Also
SoC Builder | Hardware Implementation Pane Overview