The embedded target for Intel® SoC devices enables you to:
Build a Simulink model that loads and runs an executable on the ARM® Cortex®-A processor in the Intel SoC device.
Use the capabilities and features described in Supported Features for Intel SoC Platform
To get this embedded target, perform the steps described in Add Support for Intel SoC Platform.
|Display most recent IP address, user name, and password|
Install Support for Intel SoC platform.
Supported Features for Intel SoC platform.
Guidelines for Entering Static IP Settings
This example shows you how to use Embedded Coder Support Package for Altera® SoC Platform to run a Simulink® model on an Intel SoC FPGA hardware.
Instructions on how to open a command line session to an Intel SoC device.
Description of how the Embedded Coder® Support Package for Intel SoC Devices verifies the setup of the Intel SoC hardware boards.
You can get the IP address of the Intel SoC hardware from the MATLAB® Command Window or using the Linux® command line.
Process to PING an Intel SoC hardware board connected to your development computer
Configure a Network Interface Card (NIC) on development computer to connect to hardware board