Main Content

Set Up a Bluetooth NAP Connection and the IP on your System

Once the minidrone is connected to the Windows system over Bluetooth Low Energy, we need to set the IP for the system to communicate with the minidrone.

  1. Return to the Hardware Setup Screen and click Next after the following screen.

  2. If you have closed this screen, restart the Hardware Setup Screens; firmware update and verification will not be required.

  3. Ensure that the minidrone is connected with Bluetooth and then perform the steps in the following screen to set the Bluetooth NAP connection. For more information on creating the Bluetooth NAP connection, see Set Up a Bluetooth NAP Connection for Parrot Mambo.

  4. If prompted for permissions, click Yes.

  5. Click on Test Connection to confirm that the hardware is connected.