This is machine translation
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.
MATLAB Support Package for Raspberry Pi Hardware
MATLAB® Support Package for Raspberry Pi™ Hardware enables you to communicate with a Raspberry Pi remotely from a computer running MATLAB or through a web browser with MATLAB Online™. You can acquire data from sensors and imaging devices connected to the Raspberry Pi and process them in MATLAB. You can also communicate with other hardware through the GPIO, serial, I2C, and SPI pins.
The support package functionality is extended if you have MATLAB Coder™. With MATLAB Coder, you can take the same MATLAB code used to interactively control the Raspberry Pi from your computer and deploy it directly to the Raspberry Pi to run as a standalone executable.
Installation and Setup
Install support for the hardware, update the firmware, and connect to the hardware
Connection to Raspberry Pi Hardware
Create a connection to Raspberry Pi hardware
Run on Target Hardware
Deploy a MATLAB function as a standalone executable on the hardware
LEDs
Use the Raspberry Pi’s LED
GPIO Pins
Use the Raspberry Pi’s GPIO pins
Serial Port
Use the Raspberry Pi’s serial port
I2C Interface
Use the Raspberry Pi’s I2C interface
SPI Interface
Use the Raspberry Pi’s SPI interface
Camera Board
Use the Raspberry Pi’s add-on Camera Board
Sense HAT
Use the Raspberry Pi’s add-on Sense HAT Board
Web Camera
Use the Raspberry Pi web camera
Pulse Width Modulation
Use the Raspberry Pi to create pulse-width-modulation (PWM) signals on GPIO pins
Servo
Write to servo motors connected to the Raspberry Pi hardware
Linux
Use the Linux® command shell and manage files on Raspberry Pi hardware
Display
Use the Raspberry Pi’s Display
