When transmitting or receiving real-world RF signals, use I/O properties and techniques to perform single and multichannel I/O, detect lost samples, apply burst mode buffering, and repeatedly transmit a waveform.
sdrrx | Create receiver System object for Xilinx Zynq-based radio hardware |
sdrtx | Create transmitter System object for Xilinx Zynq-based radio hardware |
capture | Capture contiguous RF data using Xilinx Zynq-based radio hardware |
designCustomFilter | Design custom filter for Analog Devices AD9361/AD9364 RF chip |
info | Synchronize receiver or transmitter radio settings with radio hardware |
transmitRepeat | Download waveform signal to radio and repeatedly transmit it over the air |
comm.SDRRxAD936x | Receive data from AD936x-based Zynq radio hardware |
comm.SDRRxFMCOMMS5 | Receive data from FMCOMMS5 Zynq radio hardware |
comm.SDRTxAD936x | Send data to AD936x-based Zynq radio hardware |
comm.SDRTxFMCOMMS5 | Send data to FMCOMMS5 Zynq radio hardware |
AD936x Receiver | Receive data from AD936x-based Zynq radio hardware |
AD936x Transmitter | Send data to AD936x-based Zynq radio hardware |
FMCOMMS5 Receiver | Receive data from FMCOMMS5 Zynq radio hardware |
FMCOMMS5 Transmitter | Send data to FMCOMMS5 Zynq radio hardware |
Overview of available radio channels to send and receive data.
Use a transmitter System object™ for repeated signal transmission.
Record RF signals for post-capture processing in MATLAB®.
Set sample times in receiver blocks or receiver System objects.
Set data frame length in receiver blocks or receiver System objects.
Detect underruns and overruns using the lost sample indicator.
To achieve real time performance, enable burst mode.
To determine whether you receive valid data from the radio hardware, apply conditional execution.
QPSK Transmit Repeat Using Analog Devices AD9361/AD9364
Continuously transmit QPSK data using the repeated waveform transmitter functionality.
QPSK Transmitter Using Analog Devices AD9361/AD9364
Transmit QPSK modulated messages onto a carrier with a specified center frequency.
QPSK Receiver Using Analog Devices AD9361/AD9364
Receive and demodulate QPSK modulated messages.
802.11a Transmission and Reception Using Analog Devices AD9361/AD9364
Transmit and receive encoded WLAN packets using a single SDR device.
Receive Tone Signal Using Analog Devices AD9361/AD9364
Perform a simple loopback of a complex sinusoid signal.
Frequency Offset Calibration Receiver Using Analog Devices AD9361/AD9364
Determine frequency offset between SDR devices using a transmitter and a receiver.
Frequency Offset Calibration Transmitter Using Analog Devices AD9361/AD9364
Determine frequency offset between SDR devices using a transmitter and a receiver.
Resolve issues encountered during installation or while using the I/O mode features of the support package.