FIFO Read HDRS

Read multiple ASCII data streams according to header information

  • Library:
  • Simulink Real-Time / RS232

Description

The FIFO Read HDRS block identifies and separates ASCII data streams that have embedded identifiers.

The data following a particular header can have varying lengths, but has a common termination marker such as <CR><LF>. Although you can attain this same functionality with the FIFO Read block, doing so requires a complicated state machine with the following behavior:

  • If the same header arrives in the FIFO more than once after the block was last executed, the block returns the latest instance of the header. In this way, the block catches up with data that arrives faster than the block executes.

  • If a header arrives in the FIFO that does not match an item in the headers list, the block discards the message.

  • If bytes arrive in the FIFO that do not match a header, the block interprets the message as having an unspecified header. The block skips these bytes.

The xpcdemos folder contains the following examples that illustrate how to use the FIFO Read HDRS block: xpcserialasciitest and xpcserialasciisplit.

Ports

Input

expand all

Connects to the software FIFO containing data read from the serial port.

If true, read from FIFO.

Dependency

To cause this port to become visible, set parameter Enable input.

Output

expand all

Vectors containing the parsed data read from the FIFO. Each output corresponds to one of the headers.

Dependency

To determine the data type of this vector, set the parameter Output vector type.

Data Types: int8 | uint8 | int16 | uint16 | int32 | uint32

Parameters

expand all

Enter the headers that you want the block to look for in a block of data from the FIFO. Enter each header in single quotes as an element in a cell array.

Programmatic Use

Block Parameter: hdr

Enter the terminating character vector for the data. Enter the characters defining the end of character vector, typically one or two characters.

Programmatic Use

Block Parameter: nterm

From the list, select the behavior of the block if the FIFO has not received new data:

  • Hold last output if no new data — Block keeps the output from the last FIFO message.

  • Zero output if no new data — Block overwrites the first element of the output with 0.

Programmatic Use

Block Parameter: hold

To create an input port that enables or disables the read operation, select this check box. The input port takes a Boolean signal.

Dependency

Causes input port E to become visible.

Programmatic Use

Block Parameter: enable

Specify the maximum number of characters for this block to return. The resulting vector size is one more than this maximum number of characters. This block indicates the number of characters being returned using the extra element as:

  • A null terminator for the 8-bit data types

  • The character count for the 16-bit and 32-bit data types

Enter a large enough number. If this number is too small, the block cannot return anything. For example, if you enter the value 10, but on execution the FIFO contains 11 characters plus the null terminator, the block does not return any characters. On the other hand, if it contains 5, the block returns 5 characters plus the null terminator.

Programmatic Use

Block Parameter: maxsize

The 8-bit data types produce a null terminated character vector in the output vector. For 16-bit and 32-bit data types, the first element contains the number of elements to expect in the rest of the output vector.

Programmatic Use

Block Parameter: outputtype

Enter the base sample time or a multiple of the base sample time. -1 means that sample time is inherited.

Programmatic Use

Block Parameter: sampletime

Introduced in R2008a