Run Precision Time Protocol clock correction servo
Simulink Real-Time / IEEE 1588
1588 Adjust Time performs time offset correction at every
sample time until the offset drops below a threshold value. It then
switches to rate correction. During rate correction, the block adjusts
the time increment value of the Ethernet card to track the master
PTP clock rate.
The PTP internal block descriptions are for informational purposes only. You cannot use these blocks by themselves in a model. The subsystem mask controls the block parameters. Do not edit the parameters directly.
Trigger— Trigger time adjustment
true, the block
runs the time adjustment algorithm at every time step.
Sample time (-1 for inherited)— Sample time
Enter the base sample time or a multiple of the base sample time.