How can I get randperm to return a permutation of a vector that has no entries at their original positions?

7 views (last 30 days)
I want take a random permutation of a vector such that all entries of the vector move to a new location.
For example, if I have a vector [1,2,3,4,5], then the following permutations are acceptable:
[2,1,4,5,3], [3,1,5,2,4], [5,4,2,3,1], etc.
However, for me, the following vector is not acceptable:
[2,4,3,5,1]
because the "3" has remained in the same location.
The "randperm" function in MATLAB allows for some of the entries in the vector to stay in the same position. Is there some way to use randperm that stops it from doing this? Or is there some other function out there that I am missing? (I have also looked at the functions "datasample" and "randsample" but they also do not seem to allow for this).

Accepted Answer

Bruno Luong
Bruno Luong on 27 Feb 2021
Edited: Bruno Luong on 27 Feb 2021

More Answers (4)

Bruno Luong
Bruno Luong on 28 Feb 2021
Edited: Bruno Luong on 28 Feb 2021
Here is an implementation of a non-rejection method and unbiased random derangement:
function p = randder(n)
% p = randder(n)
% Generate a random derangement if length n
%
% INPUT:
% n: scalar integer >= 2
% OUTPUT:
% p: array of size (1 x n), such that
% unique(p) is equal to (1:n)
% p(i) ~= i for all i = 1,2,....n.
%
% Base on: "Generating Random Derangement", Martinez Panholzer, Prodinger
% Remove the need inner loop by skrink index table J (still not ideal)
%
% See also: randperm
p = 1:n;
b = true(1,n);
m = n-1;
J = 1:m;
i = n;
u = n;
utab = 1:n;
qtab = (utab-1).*subfactorial(utab-2)./subfactorial(utab);
overflowed = ~isfinite(qtab);
qtab(overflowed) = 1./utab(overflowed);
x = rand(1,n);
r = rand(1,n);
while u>=2
if b(i)
k = ceil(x(i)*m);
j = J(k);
p([i j]) = p([j i]);
if r(i) < qtab(u)
b(j) = false;
J(k:m-1) = J(k+1:m);
m = m-1;
u = u-1;
end
u = u-1;
end
i = i-1;
if J(m)==i
m = m-1;
end
end
end % randder
%%
function D = subfactorial(n)
D = floor((gamma(n+1)+1)/exp(1));
end
It might be slower but it's a non rejection method, so at least the run-time is always predictable.
Test:
p=randder(10)
p =
7 6 1 3 9 5 10 4 2
Check validity and uniformity
m = 100000;
n = 6;
D=arrayfun(@(x) randder(n), 1:m, 'UniformOutput', false);
D=cat(1,D{:});
[U,~,J]=unique(D,'rows');
OK = all(U-(1:n),'all') && ...
~any(sort(U,2)-(1:n),'all'); % must be true
if OK
fprintf('All derangements are valid\n');
end
% Check uniformity
close all
nbins = min(1000,size(U,1));
histogram(J,nbins);
  7 Comments
Bruno Luong
Bruno Luong on 3 Mar 2021
I run de tic/toc up to 256 runs for each method and plot the histogram. Here is the results (one can see a hint of the power law (1-1/e)^p for runtime for rejection methods):
>> benchderangement
@(N)randpermfull(N)
mean(t) = 1.432840
max(t) = 7.470663
min(t) = 0.463656
(max-min)/mean = 4.890291
@(N)randder(N)
mean(t) = 1.744887
max(t) = 2.063773
min(t) = 1.632292
(max-min)/mean = 0.247283
@(N)Shuffle(N,'derange')
mean(t) = 0.592406
max(t) = 2.253336
min(t) = 0.229715
(max-min)/mean = 3.415937

Sign in to comment.


Jeff Miller
Jeff Miller on 26 Feb 2021
I don't think randperm can do that by itself, but I think this would work for an even number of items in the original vector:
orig = 1:10; % an example for the original vector of items
nvec = numel(orig);
halfn = nvec/2;
perm1 = randperm(nvec);
final = zeros(size(orig));
for ivec=1:halfn
swap1pos = perm1(ivec);
swap2pos = perm1(ivec+halfn);
final(swap1pos) = orig(swap2pos);
final(swap2pos) = orig(swap1pos);
end
sum(final==orig)
If you have an odd number of items in the original vector, handle one item specially and use this method with the remaining ones.
Would not be surprised if someone has a better solution, though.

Image Analyst
Image Analyst on 27 Feb 2021
Just keep looping until there are no matches, like this:
n = 5;
originalVector = 1 : n;
maxIterations = 10000;
loopCounter = 1;
while loopCounter < maxIterations
newVector = randperm(n);
matches = newVector == originalVector;
if ~any(matches)
break; % Break out of loop if there are no matches.
end
loopCounter = loopCounter + 1;
end
% Print out newVector to command window.
fprintf('Found answer after %d iterations.\n', loopCounter);
newVector
  5 Comments
Image Analyst
Image Analyst on 27 Feb 2021
Edited: Image Analyst on 27 Feb 2021
I did not claim my code was elegant at all, much less the "most elegant".
And yes, Jan does write very amazing code. And you write very clever code also!

Sign in to comment.


David Goodmanson
David Goodmanson on 28 Feb 2021
Edited: David Goodmanson on 28 Feb 2021
Hi Darcy,
the methods I have seen here seem to involve trying randperm and rejecting the result if an element remains in the same location. Here is a method that uses the cycle structure of the permutation and does not allow any 1-cycles (element stays where it is). Randperm is called once. The code uses the fact that if you have n elements, and do a chain of randomly chosen elements starting with a given element, the odds that you obtain a k-cycle is 1/n for every k.
I don't know how the speed is compared to the rejection method, but this code is not slow, taking half a second for 10 million elements.
n = 100
tic
q = randperm(n);
p = zeros(1,n);
nrem = n; % number of remaining elements
cycstruct = []; % cycle structure (just the lengths)
while nrem > 0
if nrem == 2;
cyc = 2;
else
cyc = randi(nrem-2)+1; % cycle length
if cyc == nrem-1; % unallowed cycle length
cyc = nrem;
end
end
cycstruct = [cycstruct cyc];
nrem = nrem-cyc;
ind = q(1:cyc);
q(1:cyc) = [];
p(ind) = circshift(ind,-1);
end
toc
cycstruct
[1:n; p]; % p is the result
any(p==1:n) % check if any element stays at home
any(diff(sort(p))~=1) % any duplicated elements?
  2 Comments
Paul
Paul on 28 Feb 2021
Can you comment on the distribution of the results of this procedure (even though the OP didn't speciify a requirement on such)? I ran the code many times with n = 4, for which there are 9 possible outcomes, but the results were not uniformly distributed among those 9 possibilities.
David Goodmanson
David Goodmanson on 28 Feb 2021
Edited: David Goodmanson on 28 Feb 2021
Hi Paul,
I agree with what you are saying. I had thought that the probability of getting a 4-cycle was the same as getiing a 2-cycle (and hence a pair of 2-cycles) but actually there are six cases of one 4-cycle and three cases of a pair of 2-cycles. So I will go look at that, but meanwhile Bruno has been on the job.

Sign in to comment.

Categories

Find more on Random Number Generation in Help Center and File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!