image thumbnail

Single-phase fully controlled converter for R loads

version 1.0.0 (15.9 KB) by Vijay
Single-phase fully controlled converter for R with & without freewheeling diode using Matlab

145 Downloads

Updated 19 Jul 2019

View License

Single phase fully controlled converters are obtained by replacing the diodes of an uncontrolled converter with thyristors. It is one of the most popular converter circuits and is widely used in the speed control of separately excited dc machines. In a fully controlled converter the output voltage can be controlled by controlling the firing delay angle (α) of the thyristors. Thyristors T1 and T2 are fired together while T3 and T4 are fired 180º after T1 and T2. Depending on the load condition and the firing angle a fully controlled bridge converter can operate either in the continuous conduction mode or in the discontinuous conduction mode. In the continuous conduction mode, the load voltage depends only on the firing angle and not on load parameters. In the discontinuous conduction mode, the output voltage decreases with increasing load current. However, the output voltage is always greater than that in the continuous conduction mode for the same firing angle.

Cite As

Vijay (2021). Single-phase fully controlled converter for R loads (https://www.mathworks.com/matlabcentral/fileexchange/72193-single-phase-fully-controlled-converter-for-r-loads), MATLAB Central File Exchange. Retrieved .

MATLAB Release Compatibility
Created with R2013b
Compatible with any release
Platform Compatibility
Windows macOS Linux
Tags Add Tags

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!