Receive UDP message from remote interface with any data type and size
Arduino UDP Ethernet Shield
Receive a UDP message from a remote interface identified by the remote IP address and remote port parameters.
If data's type is not uint8, it must be packed using the provided function;
Input can be any of the following supported int data types:
Received data must be a 1-dimensional array. There is no limit to the length of the array. The length is only limited by the performance of the hardware.
Set the local port on the Arduino
Set the data type of the received data
Specify the data size of the received data
Specify the sample time of the output data signal
This block is supported for code generation.
This block can not currently have more than one instance in a model.