Answered
RigidBodyTree issue in Matlab Systems block
Hi Fangzhong, I would suggest you reach out to our Technical Support team with the reproducible of the issue. That will enable ...

2 years ago | 0

Answered
Colission mesh for robot with prismatic joint
Hi Lukas, I think this question was answered here: https://www.mathworks.com/matlabcentral/answers/1709490-add-collission-geom...

2 years ago | 0

Answered
How to plot two moving robot in the same figure and change one of them transparency？
Hi Jian, I hope this snippet helps. % Create two instances of a rigid body tree since we want two visuals rbt=loadrobot...

2 years ago | 0

| accepted

Answered
How to plan manipulator path to avoid collision with a cage / stay inside a constrained region?
Hi William, I suggest you create a customized state space from a manipulatorStateSpace and use constraintDistanceBounds to sam...

2 years ago | 0

Answered
Can you define minimum separation distance to obstacles for robotics toolbox Rapidly-exploring Random Tree (RRT) path planner?
Hi Connor, You can try overriding the "isStateValid" routine of a "manipulatorCollisionBodyValidator" by subclassing from it....

2 years ago | 0

| accepted

Answered
Use the warehouse multirobot simulation and dynamic list of packages
Hi Sriparvathi, Currently, this example doesn't support appending multiple packages at runtime to the queue. Also, it is hard t...

2 years ago | 0

Answered
Huge code generated for a simple Simulink design
Hi Prabhulingaiah Santosh Kumar, I would suggest you reach out to our Technical Support team with the reproducible of the issue...

2 years ago | 0

Answered
Is it possible to mimic a joint in a robotic manipulator?
Hi SNS, This is currently not supported. I have forwarded your request to the development team to add support for a mimic joi...

2 years ago | 0

Answered
Can the inverse kinematics solver in MATLAB handle a robot with non-spherical wrist?
Yes, it should be supported. Please reach out to Technical Support with your specific use case should you run into any issues....

2 years ago | 0

| accepted

Answered
Plan path with minimum clearance.
Hi Lukas, You can't specify a safety clearance in the planner. However, if your environment comprises of meshes (even if it is...

2 years ago | 1

| accepted

Answered
Using coder.extrinsic in simulink has reduce the speed of simulation time
Hi @snow John, You can use the Inverse Kinematics block (see Documentation here: https://www.mathworks.com/help/robotics/ref/i...

2 years ago | 0

| accepted

Answered
Add collission geometry to prismatic joint
Hi Lukas, A rigid body, by definition, can't deform, hence it doesn't have a deformable collision geometry. A prismatic joint (...

2 years ago | 1

Answered
How could blocks from Robotics System Toolbox be built into embedded code running on Arm Cortex-A9?
Hi Charles, My best guess is that the C++ compiler on the ARM Cortex-A9 doesn't support C++11. We are using scoped enums (the e...

2 years ago | 0

Answered
Collision in rigidbodytree with external collision box
Hi Anup, To help you get started with collision geometries on the rigid body tree (adding collisions to a rigid body on the ri...

2 years ago | 0

| accepted

Answered
Hello, I run the rigidbody function in Simulink to build a robot, but I report many errors after running: Link: fatal error LNK1104: unable to open the file "Kernel32. Lib"
Hi Yue, In order to assist you better please reach out to Technical Support https://www.mathworks.com/support/contact_us.html ...

2 years ago | 0

Answered
addCollision not compatible with Matlab Coder when using *.STL File
Hi Ran, Thanks for your question, and I apologize you are facing this issue. It is expected that adding STL mesh files for ...

3 years ago | 1

Answered
¿Is it possible to use the function checkCollision (robotics toolbox) from simulink?
Hi Ignacio, Thanks for your question. You can use a MATLAB Function Block which creates a rigidBodyTree inside of it and then...

3 years ago | 1

| accepted

Answered
How to run multi robot warehouse simulation?
Hi Tuck, I am sorry you are running into this. It is a little hard to diagnose this without looking at the full build log, but ...

3 years ago | 1

| accepted

Answered
Speed up collision checking
Hi RoboTomo, Thanks for your question. There were some improvements made in performance for checkCollision in R2021b. Try and...

3 years ago | 0

| accepted

Answered
Changing Trajectory and finding theta for inverse kinematics
Hi Evan, I think you were referring to this example. The example demonstrates how to use inverseKinematics in obtaining the ...

3 years ago | 0

| accepted

Answered
Changing the simulation of a robot manipulator to be an Exo leg (from horizontally to vertically simulation)
Hi Rabe, You can try setting the fixed transform of the base joint (i.e., the hip joint) - by using the "setFixedTransform" on...

3 years ago | 0

Answered
Defining Motion Type in jointSpaceMotionModel in Robotics Systems Toolbox
Hi Mohammad, Currently only a certain set of pre-defined MotionTypes are supported. I have conveyed your request to support use...

3 years ago | 1

| accepted

Answered
How to get two links to always be parallel to each other as my robot model moves
Hi Challen, You can try modelling this as a four bar linkage using a constraintPositionTarget Please refer to this documen...

3 years ago | 0

| accepted

Answered
MATLAB Coder "Cannot allocate this handle object"
Hi Chris, I am sorry that you are seeing this issue. We have gotten reports of the same and a fix has been made in R2021b. If y...

3 years ago | 0

Answered
Update URDF Robot Model in Figure
Hi Matthew, Can you clarify what do you mean by updating the figure? Also, can you clarify which elements are you referring to...

3 years ago | 0

| accepted

Answered
Velocity Product Torque Notation
Hi Juraj, Given the equation of motion are the Coriolis terms, which when multiplied by results in the veloci...

3 years ago | 0

Answered
How do I add more than one Loading Station in a multi robot warehouse simulation?
Hi Oliver, This example was designed to model only a single loading station and allow the user to modify the station's locatio...

3 years ago | 0

Answered
There is no offset between my first joint and the base when I want to model a two axis planar robot using Robotics System Toolbox
If you replace jnt1 in setFixedTransform(jnt1, dhparams(1,:), 'dh') with body1.Joint you should notice the offset. Alternative...

3 years ago | 0

| accepted

Answered
Simple 3-D Manipulator Implementation
It is great to hear from you and I am glad to see your interest in the Robotics System Toolbox. As a starting guide, you can ref...

4 years ago | 1

Answered
Viewing and Understanding the Specifications of Pre-defined Robots
Each of the variables above are a type of rigidBodyTree object. As a starting step to view what the underlying connectivity look...

4 years ago | 2

| accepted