Answered
How to measure the output voltage of dc motor in simscape matlab
DC motor is an electromechanical system, can take electrical power and convert it to mechanical power or the other way around. T...

3 years ago | 0

Answered
What are the speed limits for the premenat magnet electric machines in SimPowerSystem toolbox
This depends on parameteration of the machine and the solver configuration. If a fixed step-solver is used we need a sample time...

3 years ago | 0

Answered
neutral point of pmsm
The PMSM block in Simscape Electrical, Simscape technology, gives access to the neutral port when zero sequence is included. The...

3 years ago | 0

Answered
measuring the phase to neutral voltage in PMSM
The PMSM block in Simscape Electrical, Simscape technology, gives access to the neutral port when zero sequence is included. The...

3 years ago | 0

Answered
Harmonics in PMSM Motor Model
The FEM-Parameterized PMSM in Simscape Electrical can be used when we need to include harmonics. This would of course need good ...

3 years ago | 0

Answered
PMSM_SIMULINK_BLOCK
I do not know what block you are using but in general the load of the motor can be speed or load torque. If we want to do torque...

3 years ago | 0

Answered
How to use the converter with the six-pulse gate multiplexer
Connect the output G of the Six-Pulse Gate Multiplexer to the Converter (Three-Phase) G port.

3 years ago | 0

Answered
Change parameter of mask
I'm afraid this is not possible. Might work to use fast restart and restart the model without recompiling. I do not think is rea...

3 years ago | 0

Answered
Can I adapt the "HV Battery Charge/Discharge" open-source matlab model to my research needs on a solid state battery?
This model can be adapted to meet different requirements. The battery can also be replaced with the Battery (Table-Based) if dat...

3 years ago | 0

Answered
Simulation for Changing Battery Temperature and Measuring Charging Time
For battery simulations, the best place to start is Simscape Battery, a new toolbox introduced in R2022b. There are many example...

3 years ago | 0

Answered
how the state of charge of the battery can be find for lead acid battery
For battery simulations, the best place to start is Simscape Battery, a new toolbox introduced in R2022b. There are many example...

3 years ago | 0

Answered
simulate a lead acid battery
I suspect the resistor and the battery are implemented using different technologies. Most likely, Simscape and Specialied Power ...

3 years ago | 0

Answered
Battery simulation without Simscape
An implementation using pure Simulink blocks of an equivalent battery RC circuit is possible based on mathematical equations. Ho...

3 years ago | 0

Answered
12.8 V, 40 Ah, Lithium-Ion (LiFePO4) Battery Aging Model
When the current is positive the battery is discharging, when the current is negative the battery is charging. We can see from t...

3 years ago | 0

Answered
how can we make the model of Electric Vehicle battery by using 18650 li_ion battery to get the 19k watt capacity ?
For battery simulation, the best place to start with is Simscape Battery, a new toolbox introduced in R2022b. There are many exa...

3 years ago | 0

Answered
Battery SOC plotting in Scope
If the initial charge and current are known, a simple Coulomb counting can be performed to obtain the SOC. For battery simulati...

3 years ago | 0

Answered
How to detect lipo battery % charge left?
For battery simulation, the best place to start with is Simscape Battery, a new toolbox introduced in R2022b. There are many exa...

3 years ago | 0

Answered
Mathematical Modeling of battery charging and discharge
For battery simulation, the best place to start with is Simscape Battery, a new toolbox introduced in R2022b.

3 years ago | 0

Answered
Induction motor losses?
We don't know what model do you use but I assume at least the copper losses are included via the winding resistances (unless an ...

3 years ago | 0

Answered
Areas of improvement in Field Oriented Control (FOC) ?
Field Oriented Control is a control strategy for electric machines that's been available since 1980s. Probably in terms of archi...

3 years ago | 0

Answered
Microstepping on Adafruit Motor Shield V2
A good starting point is the Stepper Motor Averaged Mode example in Simscape Electrical. In this example there are three steppin...

3 years ago | 0

Answered
simulation of stepper motor with microstepping
A good starting point is the Stepper Motor Averaged Mode example in Simscape Electrical. In this example there are three steppin...

3 years ago | 0

Answered
Why I cannot connect Six-Pulse Gate Multiplexer to Three-Level Converter in Matlab 2016b?
Because you use a Three-Level Converter that is expecting 12 gate signals. If you want to use the Three-Level Converter (Three-P...

3 years ago | 0

Answered
does matlab 7.1 has in built bldc motor model as in matlab 7.11 ?
The Permanent Magnet Synchronous Machine in Specialized Power Systems has been introduced in R2006a. The BLDC block in Simscape ...

3 years ago | 0

Answered
How to connect PV array with Converter (Three-Phase)
The two blocks are from different technologies. There are two technologies in Simscape Electrical, Simscape technology and Speci...

3 years ago | 0

Answered
How can I create a bar graph
Best to start with the documentation of bar graph.

3 years ago | 0

Answered
SVPWM for three-level diode-clamped converter simulation ??
A good place to start is the Torque Control in Three-Level Converter-Fed Asynchronous Machine Drive example in Simscape Electric...

3 years ago | 0

Answered
How can i make the model of the 5 phase permanent magnet synchronous motor?
Simscape Electrical introduced the PMSM (Five-Phase) block in R2020a.

3 years ago | 0

Answered
How do i find the sampling time of this buck converter circuit?
The model is implemented in continuous time. If the model is also running in variable step then you need to change the configura...

3 years ago | 0

Answered
Why a step is used to Tm of asynchronous motor in V/F Drive simulation
The step is simulating the load torque. I assume the model is controlling the speed. At a given time a step load torque is appli...

3 years ago | 0