Hardware Implementation Pane: Altera Cyclone V SoC Development Kit and Arrow SoCKit Development Hardware Boards

To configure hardware parameters for Altera^® Cyclone^® V SoC development kit, or Arrow SoCKit development boards, follow these steps:

1. In the Simulink^® Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameter dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to Altera Cyclone V SoC development kit and click Apply.

4. The parameter values under Hardware board settings are automatically populated to their default values.

   You can optionally adjust these parameters for your particular use case.

5. Click Apply to apply the changes.

For more information on selecting a hardware support package and general configuration parameters, see Hardware Implementation Pane.

Operating system options

Parameter	Description
Base rate task priority	Static priority of base rate task of Simulink model
Detect task overruns	Detection of failure to complete execution of current loop within current time step

Board Parameters

Parameter	Description
Device Address	Device IP address of target hardware
Username	User name for operating system on target hardware
Password	User password for operating system on target hardware

Clocking

Parameter	Description
CPU Clock (MHz)	Frequency of the primary CPU core clock

Build Options

Parameter	Description
Build action	Simulink Coder™ build operation for model

External Mode

Parameter	Description
Communication interface	Transport layer external mode uses to exchange data
Run external mode in a background thread	Execution of external mode task in generated code within background thread
Port	TCP/IP port number of target hardware
Verbose	Verbose status messages for external mode execution progress and updates