Main Content

Communication interface

Transport layer external mode uses to exchange data between the host and the target hardware

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / External mode

Description

The Communication interface selects the transport layer external mode uses to exchange data between the host and the target hardware.

Settings

Serial | TCP/IP | CAN

Select the transport layer external mode uses to exchange data between the host and the target hardware. The target hardware boards include:

STM32F4-Discovery
STM32F746G-Discovery
STM32F769I-Discovery
STM32L475VG-Discovery
STM32Fxxx, STM32Gxx, STM32H7xx, STM32F7xx, STM32L4xx, STM32L5xx, STM32WBxx, STM32U5xx Based-Boards

The following are the limitations when executing the model in external mode over TCP/IP (using XCP).

  • External mode over TCP/IP is not supported if the model consists of WiFi TCP Receive/Send or ThingSpeak Read/Write blocks.

  • The model sample time should not be less than 50ms.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b

See Also

| | |