Controlled Voltage Source

Ideal voltage source driven by input signal

• 

Libraries:
Simscape / Foundation Library / Electrical / Electrical Sources

Description

The Controlled Voltage Source block represents an ideal voltage source that is powerful enough to maintain the specified voltage across its terminals regardless of the current flowing through the source.

The output voltage is V = Vs, where Vs is the numerical value presented at the physical signal port.

Examples

Nonlinear Bipolar Transistor

An implementation of a nonlinear bipolar transistor based on the Ebers-Moll equivalent circuit. R1 and R2 set the nominal operating point, and the small signal gain is approximately set by the ratio R3/R4. The 1uF decoupling capacitors have been chosen to present negligible impedance at 1KHz. The model is configured for linearization so that a frequency response can be generated.

• Open Model

Ports

Input

vT — Voltage control signal, V

physical signal

Input physical signal that specifies the voltage value.

The port name is not visible in the block icon, but you can see this name in the underlying source file by clicking the Source code link in the Description tab of the block dialog box.

Conserving

+ — Positive terminal

electrical

Electrical conserving port associated with the source positive terminal.

- — Negative terminal

electrical

Electrical conserving port associated with the source negative terminal.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2007a