Log Simulation Statistics
This example shows how you can access and analyze information on zero crossings during
simulation. By default, the zero-crossing data is not logged. If you select the Log
simulation statistics check box, the simulation log variable contains an
SimulationStatistics node for each block that can produce zero
crossings, at the price of slower simulation speed and heavier memory consumption.
Open the Mechanical System with Translational Hard Stop example model by typing
ssc_mechanical_system_translational_hardstopin the MATLAB® Command Window.
Open the Configuration Parameters dialog box and then, in the left pane, select Simscape. You can see that this example model already has data logging for the whole model enabled, as well as simulation statistics, and that the workspace variable name is
Simulate the model. This creates a workspace variable named
simlog_ssc_mechanical_system_translational_hardstop(as specified by the Workspace variable name parameter), which contains the simulation data. Because you selected the Log simulation statistics check box, the workspace variable contains additional nodes that represent zero-crossing data.
simlogvariable has the same hierarchy as the model. To see the whole variable structure, at the command prompt, type:
This command prints the whole data tree.
ssc_mechanical_system_translational_hardstop +-Damper_M1 | +-C | | +-v | +-R | | +-v | +-f | +-v +-Damper_M2 | +-C | | +-v | +-R | | +-v | +-f | +-v +-MTRef_DM1 | +-V | +-v +-MTRef_DM2 | +-V | +-v +-MTRef_VS | +-V | +-v +-Mass_1 | +-M | | +-v | +-f | +-v +-Mass_2 | +-M | | +-v | +-f | +-v +-Sensor_M1 | +-Ideal_Translational_Motion_Sensor | | +-C | | | +-v | | +-P | | +-R | | | +-v | | +-V | | +-f | | +-v | | +-x | +-MTRef | | +-V | | +-v | +-PS_Terminator | | +-I | +-PS_Terminator1 | +-I +-Sensor_M2 | +-Ideal_Translational_Motion_Sensor | | +-C | | | +-v | | +-P | | +-R | | | +-v | | +-V | | +-f | | +-v | | +-x | +-MTRef | +-V | +-v +-Spring_M1 | +-C | | +-v | +-R | | +-v | +-f | +-v | +-x +-Translational_Hard_Stop | +-C | | +-v | +-R | | +-v | +-SimulationStatistics | | +-zc_1 | | | +-crossings | | | +-values | | +-zc_2 | | +-crossings | | +-values | +-f | +-v | +-x +-Velocity_Source +-C | +-v +-R | +-v +-S +-f +-v
Translational_Hard_Stopnode, there is a node called
SimulationStatistics, which contains zero-crossing information. This means that Translational Hard Stop is the only block in the model that can generate zero-crossings during simulation.