jc_0627: Usage of Discrete-Time Integrator blocks
Since R2020a
Guideline Publication
Control Algorithm Modeling Guidelines - Using MATLAB®, Simulink®, and Stateflow®
Sub ID Recommendations
NA-MAAB — a
JMAAB — a, b
MATLAB Versions
All
Rule
Sub ID a
Discrete-Time Integrator block parameters Upper saturation limit and Lower saturation limit shall be defined.
Not Applicable
Sub ID b
When Discrete-Time Integrator block
parameters Upper saturation limit and Lower
saturation limit are defined as
Simulink.Parameter
, parameter Data
type shall be set to auto
.
Not Applicable
Rationale
Sub ID a:
Avoids block output overflow and prevents other computation blocks that use the output of this block from producing unexpected results.
Sub ID b:
Simulation errors occur when Data type is set to a value other than
auto
,single
, ordouble
.
Verification
Model Advisor check: Check usage of Discrete-Time Integrator block (Simulink Check)
Last Changed
R2020a
See Also
Version History
Introduced in R2020a