setProperty

Class: sltest.testmanager.TestCase
Namespace: sltest.testmanager

Set test case property

Syntax

setProperty(tc,Name,Value)


Description

setProperty(tc,Name,Value) sets a test case property.

Input Arguments

tc — Test case

sltest.testmanager.TestCase object

Test case to set property, specified as an sltest.testmanager.TestCase object.

Name-Value Arguments

Specify optional pairs of arguments as Name1=Value1,...,NameN=ValueN, where Name is the argument name and Value is the corresponding value. Name-value arguments must appear after other arguments, but the order of the pairs does not matter.

Before R2021a, use commas to separate each name and value, and enclose Name in quotes.

Example: 'StopTime',100

Model — System Under Test model name

'' (default)

The model name in the System Under Test section, specified as a character vector.

Example: 'sldemo_absbrake'

SimulationMode — Simulation mode

empty character vector (default) | 'Normal' | 'Accelerator' | 'Rapid Accelerator' | 'Software-in-the-Loop (SIL)' | 'Processor-in-the-Loop (PIL)'

The simulation mode of the model or harness, specified as a character vector. To return to the default model settings, specify an empty character vector, ''.

Example: 'SimulationMode','Rapid Accelerator'

OverrideSILPILMode — Override SIL or PIL mode

false or 0 (default) | true or 1

Override SIL/PIL simulation mode of model blocks to Normal simulation mode, specified as a numeric or logical 1 (true) or 0 (false). If this property is true or 1, the associated check box in the Simulation Settings Overrides section of the Test Manager is selected.

OverrideStartTime — Override model start time

false or 0 (default) | true or 1

Indicate if the test case overrides the model start time, specified as a numeric or logical 1 (true) or 0 (false).

StartTime — Model start time

0 (default) | scalar

Model start time, specified as a scalar value.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

OverrideStopTime — Override model stop time

false or 0 (default) | true or 1

Indicate if the test case overrides the model stop time, specified as a numeric or logical 1 (true) or 0 (false).

StopTime — Model stop time

10 (default) | scalar

Model stop time, specified as a scalar value.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

StopSimAtLastTimePoint — Stop simulation at last input time point

false or 0 (default) | true or 1

Stop simulation at last input time point instead of at the Stop Time model setting, specified as numeric or logical 1 (true) or 0 (false).

Data Types: logical

OverrideInitialState — Override model initial state

false or 0 (default) | true or 1

Indicate if the test case overrides the model initial state, specified as a numeric or logical 1 (true) or 0 (false).

InitialState — Model initial state

empty character vector (default)

Model initial state from a workspace variable, specified as a character vector.

HarnessName — Test harness name

empty character vector (default)

Name of a test harness to use in the System Under Test section, specified as a character vector.

HarnessOwner — Test harness owner name

empty character vector (default)

Name of the test harness owner, specified as a character vector.

ComponentUnderTestName — Name of Model block to test

Simulink.BlockPath object

Name of Model block to test, specified as a Simulink.BlockPath object. For the block path, include the full path starting from the top model. The Model block can be at any level in the model or test harness hierarchy. When the test case runs the whole top-level model or harness, it tests the specified Model block in context. However, the coverage results include only the results for the tested Model block.

UseSignalEditorScenarios — Override Signal Editor scenarios

false or 0 (default) | true or 1

Indicate if the test case overrides the model and uses different Signal Editor scenarios in the Inputs section, specified as a numeric or logical 1 (true) or 0 (false).

SignalEditorScenario — Signal Editor scenario name

empty character vector (default)

Signal Editor scenario name, specified as a character vector. To return to the default model settings, specify an empty character vector, ''.

IsTestDataReferenced — Use external file to create test case

false or 0 (default) | true or 1

Whether to use test data from an external file, such as an Excel^® or MAT file, to create the test case, specified as a numeric or logical 1 (true) or 0 (false). If isTestDataReferenced is true or 1, use TestDataPath to specify the path to file.

TestDataPath — Path to external file for test case

character vector

Path to the external file being referenced for creating the test case, specified as a character vector.

Adapter — Function to convert Excel or MAT file test data

function handle

Function to convert Excel or MAT file test data to a format supported by the Test Manager, specified as a function handle. See sltest.testmanager.registerTestAdapter for more information.

SDIViewFile — Path to Simulation Data Inspector view file for test case

character vector

Path to the Simulation Data Inspector (SDI) view file for a test case, specified as a character vector. The view file specifies which signals to plot and their layout in the test case results. The Test Manager does not support some configurations in an SDI view file, such as axes plot layouts other than time plots and axes layouts other than N-by-M grids. However, the Test Manager applies a similar configuration, if possible. You can assign a different view file to each test case in a test file. Use Simulink.sdi.saveView to create and save an SDI view file. For more information, see Save and Share Simulation Data Inspector Data and Views.

TestSequenceBlock — Test Sequence block path

character vector

Test Sequence block path, specified as a character vector. The specified block contains the test sequence scenarios to use in the test case. Specify TestSequenceBlock and TestSequenceScenario to run a scenario other than the active scenario. If you do not specify a value for TestSequenceScenario, the test runs the active scenario in the Test Sequence block. If your Test Sequence block does not have scenarios, the test runs the single test sequence in the block.

TestSequenceScenario — Test Sequence scenario name

character vector

Test Sequence scenario name, specified as a character vector. The specified test sequence scenario runs instead of the active scenario or, if you are using iterations, the scenario runs as the default scenario for all iterations. Use setTestParam to assign a different scenario to an iteration. You must specify TestSequenceBlock to use TestSequenceScenario.

Release — Release on which to run the test case

Current (default) | string | character vector | cell array | string array

Release on which to run the test case, specified as a string, character vector, or cell array. For equivalence tests, you can specify only one release for each simulation index, for example, ('Release',releaseNames{1},'SimulationIndex',1). For other test types, you can specify multiple releases as a cell or string array, for example, ('Release',releaseNames), where releaseNames is a cell array, such as {'Current','R2020a'}.

OverrideModelOutputSettings — Override model output settings

false or 0 (default) | true or 1

Indicate if the test case overrides the model settings under the Outputs section, specified as a numeric or logical 1 (true) or 0 (false).

SaveOutput — Override saving output

false or 0 (default) | true or 1

Indicate if the test case overrides saving model output, specified as a numeric or logical 1 (true) or 0 (false).

SaveState — Save output state values

false or 0 (default) | true or 1

Indicate if the test case is set to save output state values, specified as a numeric or logical 1 (true) or 0 (false).

SignalLogging — Log signals

true or 1 (default) | false or 0

Indicate if the test case is set to log signals marked for logging in the model, specified as a numeric or logical 1 (true) or 0 (false).

DSMLogging — Log Data Store variables

true or 1 (default) | false or 0

Indicate if the test case is set to log Data Store variables, specified as a numeric or logical 1 (true) or 0 (false).

SaveFinalState — Save final state

false or 0 (default) | true or 1

Indicate if the test case is set to store final state values, specified as a numeric or logical 1 (true) or 0 (false).

SimulationIndex — Equivalence test case simulation

1 (default) | 2

Simulation number that the property applies to, specified as an integer, 1 or 2. This setting applies to the simulation test case.

ConfigSetOverrideSetting — Configuration setting override

1 (default) | 2 | 3

Override the configuration settings, specified as an integer.

• 1 — No override

• 2 — Use a named configuration set in the model

• 3 — Use a configuration set specified in a file

ConfigSetName — Configuration set name

empty character vector (default)

Name of the configuration setting in a model, specified as a character vector.

ConfigSetVarName — Configuration set variable name

empty character vector (default)

Variable name in a configuration set file, specified as a character vector.

ConfigSetFileLocation — Configuration set file path

empty character vector (default)

Filename and path of the configuration set, specified as a character vector.

PreloadCallback — Pre-load callback script

character vector

Pre-load callback script, specified as a character vector.

PostloadCallback — Post-load callback script

character vector

Post-load callback script, specified as a character vector.

CleanupCallback — Cleanup callback script

character vector

Test-case level cleanup callback script, specified as a character vector. The function deletes any existing callback script and replaces it with the specified character vector.

Example: 'clear a % clear value from workspace'

PreStartRealTimeApplicationCallback — Real-time pre-start callback

character vector

Character vector evaluated before the real-time application is started on the target computer, specified as a character vector. For more information on real-time testing, see Test Models in Real Time.

IterationScript — Iteration script

character vector

Iteration script evaluated to create test case iterations, specified as a character vector. For more information about test iteration scripts, see Test Iterations.

FastRestart — Run iterations using fast restart

false or 0 (default) | true or 1

Indicate if the test iterations run using fast restart mode, specified as a numeric or logical 1 (true) or 0 (false).

SaveBaselineRunInTestResult — Save baseline in test result

false (default) | true

Indicate if the test case saves the baseline used in the test result after test execution, specified as a numeric or logical 1 (true) or 0 (false).

SaveInputRunInTestResult — Save input in test result

false or 0 (default) | true or 1

Enable saving external input run used in test result, specified as a numeric or logical 1 (true) or 0 (false).

StopSimAtLastTimePoint — Stop simulation at last input time

false or 0 (default) | true or 1

Enable stopping the simulation at the final time value of the input, specified as a numeric or logical 1 (true) or 0 (false).

LoadAppFrom — Application location

1 (default) | 2 | 3

Location from which to load the application, specified as an integer. This property is available only in real-time test cases.

• 1 — Model

• 2 — Target application

• 3 — Target computer

For more information on real-time testing, see Test Models in Real Time.

TargetComputer — Target computer name

character vector

Name of the target computer, specified as a character vector. This property is available only in real-time test cases. For more information on real-time testing, see Test Models in Real Time.

TargetApplication — Target application name and path

character vector

Name and path of the target application, specified as a character vector. This property is available only in real-time test cases. For more information on real-time testing, see Test Models in Real Time.

VariantConfiguration — Name of variant configuration

string | character vector

Since R2024a

Name of variant configuration to apply to the model before running the test case, specified as a string or character vector.

This property applies to models that use variant elements such as variant blocks and variant parameters, and also have variant configurations created for the model using Variant Manager for Simulink^®. For such a model, you can specify a variant configuration that can activate a specific variant path across the model hierarchy before the test runs.

For an example, see Run Tests for Variant Models Using Variant Configurations.

Example: "LinInterExpNoNoise"

Data Types: char | string

RoadRunnerInstallationFolder — RoadRunner application installation folder

string | character vector

RoadRunner application installation folder, specified as a string or character vector. This property applies only to RoadRunner test cases.

RoadRunnerProjectFolder — RoadRunner project folder

string | character vector

RoadRunner project folder, specified as a string or character vector. This property applies only to RoadRunner test cases.

RoadRunnerScenarioPath — Path to RoadRunner scenario file

string | character vector

Path to RoadRunner scenario file, specified as a string or character vector. This property applies only to RoadRunner test cases.

RoadRunnerRunInConsoleMode — Option to run RoadRunner scenario in console mode

true or 1 (default) | false or 0

Option to run RoadRunner scenario in console mode, specified as a numeric or logical 1 (true) or 0 (false). Set this property to false or 0 to run the scenario in graphical mode, which displays the RoadRunner application as it runs the scenario. When the property value is 1 or true, the RoadRunner application runs in the background. This property applies only to RoadRunner test cases.

RoadRunnerTurnOffPacing — Option to set RoadRunner pacing

true or 1 (default) | false or 0

Option to set RoadRunner pacing, specified as a numeric or logical 1 (true) or 0 (false). When RoadRunnerTurnOffPacing is 1 or true, the pacing is off and the scenario runs at its normal speed. Set this property to false or 0 to enable changing the speed at which the scenario runs. This property applies only to RoadRunner test cases.

StopOnFailure — Option to stop execution of test case when iteration fails

false or 0 (default) | true or 1

Option to stop execution of a test case when an iteration fails, specified as a numeric or logical 1 (true) or 0 (false). When StopOnFailure is 0 (false), the Test Manager executes all test iterations in the RoadRunner test case. When StopOnFailure is 1 (true), the Test Manager stops execution of the RoadRunner test case when an iteration fails. Any subsequent iterations in the test case remain untested and the Test Manager executes remaining test cases. This property applies only to RoadRunner test cases.

OverrideRoadRunnerDefaultSettings — Option to override default RoadRunner settings

true or 1 (default) | false or 0

Option to override default RoadRunner path settings, specified as a numeric or logical 1 (true) or 0 (false). Set this property to true or 1 to use the settings that you specify using the API instead of in the Test Manager, or to false or 0 to use the settings in the Test Manager. This property applies only to RoadRunner test cases.

Examples

Set Model as System Under Test

% Create the test file, test suite, and test case structure
tf = sltest.testmanager.TestFile('API Test File');
ts = createTestSuite(tf,'API Test Suite');
tc = createTestCase(ts,'baseline','Baseline API Test Case');

% Remove the default test suite
tsDel = getTestSuiteByName(tf,'New Test Suite 1');
remove(tsDel);

% Assign the system under test to the test case
setProperty(tc,'Model','sldemo_absbrake');

Version History

Introduced in R2015b

R2024a: Control execution of RoadRunner test cases

Use the StopOnFailure property to specify whether to stop the execution of a RoadRunner test case when an iteration fails.

R2024a: Override model stop time

Use the StopSimAtLastTimePoint property to stop simulation at the last input time point instead of the model Stop Time.

R2024a: Override RoadRunner default path settings

Use the OverrideRoadRunnerDefaultSettings property to override the default file and folder paths for RoadRunner tests.

R2024a: New property for variant configuration

For variant models, use the VariantConfiguration property to specify the variant configuration to apply to the model before running the test.

R2023b: Set properties for RoadRunner test cases

These properties have been added for RoadRunner test cases:

• RoadRunnerInstallationFolder

• RoadRunnerProjectFolder

• RoadRunnerScenarioPath

• RoadRunnerRunInConsoleMode

• RoadRunnerTurnOffPacing

R2023a: New property for Model block name

Use the ComponentUnderTestName property to specify the Model block to test. The Model block can be at any level of the model or test harness hierarchy.