Send data using Bluetooth Low Energy (BLE) protocol
Simulink Support Package for Android Devices / Communication
The BLE Send block transmits data or instructions from your Android™ mobile device to a nearby device or sensor using the Bluetooth® Low Energy (BLE) protocol.
A BLE device configured in the central mode scans and detects nearby BLE devices and determines their available services. After scanning, a BLE device operating in the central mode can connect to any of the discovered BLE devices.
When you set the Mode of the devices to
(Client), you must scan and detect nearby BLE devices. To start
BLE Setup wizard, click Scan. When the wizard completes,
select a Peripheral Device and
Characteristic found during the scan and
A BLE device configured in the peripheral mode advertises its presence to other devices, broadcasting minimal information on the service supported and identity of the device. This allows BLE devices configured in the central mode to scan and detect nearby BLE devices and determine their available services.
When you set the Mode of the device to
Peripheral (Server), you must specify the
Service and Characteristic of your
device. Other devices with the same service and characteristic then receive the
data sent from your Android mobile device.
Service and Characteristic
BLE data exchange is based on the Generic Attributes (GATT) profile, which defines a hierarchical data structure. GATT consists of a service, such as Heart Rate service, that can contain several characteristics, such as Heart Rate Measurement or Body Sensor Location. Universally Unique ID (UUID) defines both services and characteristics allowing different BLE devices to identify the services and characteristics of the connected device.
When a BLE device operates in peripheral mode, the available services provided by the device are advertised to any listening BLE devices operating in the central mode. Only when the BLE central device establishes the connection to the BLE peripheral device are the characteristics within the service made available. Many services and associated characteristics are already available as standards, including the Heart Rate service.
You can optionally specify your own or custom services and characteristics using your own UUIDs for the service and characteristics. To enable custom UUID specification, select the Specify using UUID parameter.
Port1 — Input data
The block accepts data as an N-by-1 array.
Mode — Set the BLE mode of your device
Peripheral (Server) (default) |
Set the BLE hardware of your device to either peripheral or central
mode. In the
Peripheral (Server) mode, you must
specify the Service and
Characteristic of your device. Other devices
then receive the data sent from your Android mobile device with the same
service and characteristic.
When you set the
Mode of the devices to Central
(Client), you must scan and detect nearby BLE devices before selecting
the peripheral device and characteristic.
Service — BLE service name
Heart Rate Service (default) | ...
Select the service broadcast by the BLE device when operating in the
Peripheral (Server) mode. Available services that
can be broadcast from the device are listed in the following table. When
Specify by UUID is enabled, you can write a
specific UUID value for the characteristic as a character array.
|Generic Access||Device Name|
|Peripheral Privacy Flag|
|Peripheral Preferred Connection Parameters|
|Generic Attribute||Service Changed|
|Glucose service||Glucose Measurement|
|Glucose Measurement Context|
|Record Access Control Point|
|Health Thermometer service||Temperature Measurement|
|Heart Rate service||Heart Rate Measurement|
|Body Sensor Location|
|Heart Rate Control Point|
|Blood pressure service||Blood Pressure Measurement|
|Intermediate Cuff Pressure|
|Blood Pressure Feature|
|Running Speed and Cadence||RSC Measurement|
|SC Control Point|
|Cycling Power service||Sensor Location|
|Cycling Power Measurement|
|Cycling Power Vector|
|Cycling Power Feature|
|Cycling Power Control Point|
|Location and Navigation||Location and Navigation Characteristic|
|LN Control Point|
|Environmental Sensing||Magnetic Declination|
|True Wind Speed|
|True Wind Direction|
|Apparent Wind Speed|
|Apparent Wind Direction|
|Magnetic Flux Density - 2-D|
|Magnetic Flux Density - 3-D|
|Barometric pressure Trend|
|Body Composition service||Body Composition Feature|
|Body Composition Measurement|
|Weight Scale||Weight Scale Measurement|
|Weight Scale Feature|
|Continuous Glucose Monitoring Service||CGM Measurement|
|CDM Session start Time|
|Indoor Positioning||Indoor Positioning Configuration|
|Local North Coordinate|
|Local East Coordinate|
|Pulse Oximeter Service||Record Access Control Point|
|PLX Spot-Check Measurement|
|PLX Continuous Measurement|
|Fitness Machine Service||Treadmill Data|
|Cross Trainer Data|
|Indoor Bike Data|
|Supported Speed Range|
|Supported Inclination Range|
|Supported Resistance Level Range|
|Supported Heart Range|
|Supported Power Range|
Characteristic — BLE characteristic from selected service
Heart Rate Measurement (default) | ...
Select the characteristic for a given BLE service when operating in
the peripheral (server) mode. See Service for the
available characteristics, and their parent services, provided by the
BLE Send block. When
UUID is enabled, you can write a specific UUID value for
the characteristic as a character array.
Specify using UUID — Specify service and characteristic using UUID
off (default) | on
When enabled, specify the BLE service and characteristic using Universally Unique ID (UUID) values.
Peripheral Device — Devices available through BLE
no devices (default)
Select an available peripheral device or sensor found using the BLE scan app. If you cannot see any devices listed, click Scan to detect new BLE devices within range of your mobile device.
Scan — Discover devices and characteristics
Discover devices and characteristics of nearby Bluetooth Low Energy (BLE) devices and sensors and connect them to your Android mobile device.
Connect your Android device to your development computer. If you have not previously connected and configured your Android device, see Hardware Setup.
Configure the model to use your connected Android. For more information, see Run Model on Android Devices.
Set the Mode of the BLE Receive block to
To open the BLE Setup wizard, click the Scan button.
The BLE Setup wizard allows you to upload the BLE Scanner Android app onto your Android device. The BLE Scanner Android app then scans for nearby BLE devices.
Follow the instructions provided in the BLE Scanner Android app to scan for BLE devices. The BLE Scanner Android app temporarily connects to the devices to gather their available services and characteristics as part of the scanning process.
After exiting the BLE Scanner Android app, confirm you can see BLE devices in the BLE Setup wizard. Close the wizard.
Re-open the BLE Send block mask and select from the available peripheral devices and characteristics.
Characteristic — BLE characteristic from peripheral device
no characteristic (default)
Select the characteristic available from the selected Peripheral Device. See Service for the available characteristics, and their parent services, provided by the BLE Send block.