Set logical value to the 3-wire port on VEX EDR V5 Robot Brain
Simulink Coder Support Package for VEX EDR V5 Robot Brain / Actuators
The Digital Output block is used to set the digital/logical value (1 or 0) to the selected 3-wire port on a VEX® EDR V5 Robot Brain.
Port_1 — Sets logical value (1 or 0) of pin
Connect the input port to a block that generates a logical value
3-Wire Expander (smart port) — Select the smart port that is used by 3-Wire Expander
None (default) |
If you are using a 3-Wire Expander, specify the smart port on VEX EDR V5 Robot Brain to which the expander is connected.
Port — Select the 3-wire port to which you want to send the digital signal
A (default) |
Select the 3-wire port on the VEX EDR V5 Robot Brain to which you want to send the digital signal.
Do not assign the same port to more than one Digital Output block within the same model.
Introduced in R2018b