Main Content

Cab-Over Tractor

Cab-over tractor dimensions

expand all in page

Description

Cab-Over Tractor is one of the tractors that you can use in the 3D simulation environment. The environment is rendered using the Unreal Engine® from Epic Games®. The Dimensions section provides the dimensions of this tractor. The height dimensions are with respect to the vertical ground plane. The length and width dimensions are with respect to the origin of the tractor in the vehicle coordinate system. The origin is on the ground plane, at the normal projection of the mid-point of the rear axles along the vehicle centerline.

To add this type of tractor to the 3D simulation environment:

  1. Add a Simulation 3D Tractor block to your Simulink® model.

  2. In the block, set the Type parameter to Cab-over tractor.

Dimensions

expand all

Top-down view of tractor with its width marked as 2.3 meters.

Side view of tractor with the origin marked in blue beneath its two rear axles and its length and overhang dimensions shown. The tire radius is 0.51 meters.

Front view of tractor with the origin marked in blue beneath its center and its front tire width and front axle dimensions shown. The front tire width is 0.31 meters. The front axle width is 2.11 meters.

See Also

|

Topics