Video Capture MIPI
Import live video frames from MIPI card on Zynq-based hardware
Add-On Required: This feature requires the Vision HDL Toolbox Support Package for Xilinx Zynq-Based Hardware add-on.
Vision HDL Toolbox Support Package for Xilinx Zynq-Based Hardware
The Video Capture MIPI block captures video frames from an IMX274 FMC MIPI® card connected to a Zynq®-based board and imports the frames into your Simulink® model. The support package programs the FPGA with an image that demosaics and gamma-corrects the video input from the sensor, and allows capture of the video from Simulink. You can control the frame size and Simulink video signal format options from the Video Capture MIPI block.
The FPGA image also contains an IP core called the FPGA user logic that you can generate from your design by using HDL Workflow Advisor. The block captures the input video after the FPGA user logic.
The video data is in AXI4-Stream Video format on the FPGA. When you import the video into Simulink, the stream converts to frame-based video.
MIPI Receive path reference design requires the same video
resolution and color format for the entire data path.
The design you target to the FPGA user logic must not modify the frame size or format of the
R, G, B — Color components of input video frame
The block returns one matrix for each color component of the input video. The dimensions of each matrix match the frame size.
To enable these ports, set Pixel format to
RGB and Image signal to
Separate color signals.
Image — Color input video frame
The block returns a 3-by-height-by-width matrix, where height and width match the frame size.
To enable this port, set Pixel format to
RGB and Image signal to
Video source — Source of video stream
The video stream originates from the IMX274 camera board. Set the Frame size parameter to match the resolution of your attached camera.
Frame size — Resolution of input video
1280x720p (default) |
Select 720p HDTV format (
1280x720p) or 1080p HDTV format
Frame rate — Rate at which consecutive images are displayed (frames per second)
120 fps (default) |
The block sets the Simulink sample time for the captured video frames to 1/Frame rate.
1920x1080p supports only
Pixel format — Format of pixel stream
RGB pixel stream format returns three 8-bit color
components per pixel, which is 24 bits per pixel total. You can also select whether the block
returns a multidimensional signal or three separate color signals. For details, see the
Image signal parameter.
Image signal — RGB output stream format
Separate color signals (default) |
One multidimensional signal
Specify the RGB output stream format as one of these values.
Separate color signals— The block returns separate height-by-width matrices for each color component. In this case, the block has R, G, and B output ports.
One multidimensional signal— The block returns a single 3-by-height-by-width matrix. In this case, the block has an Image output port.
Introduced in R2022b