Vehicle Network Toolbox Supported Hardware
As of this release, Vehicle Network Toolbox™ supports CAN devices indicated in the following table.
To communicate with a CAN device, you must install the required driver and libraries on your system. You can download and install the drivers from your device vendor website, referenced in the table. For deployed applications, ensure that appropriate drivers are installed on the target machine.
|Required Vendor Drivers
|Kvaser CAN Devices
"Kvaser Drivers for Windows" or "Kvaser Linux Drivers and SDK" available at Kvaser Downloads.
|Kvaser CAN Interface Support
|MathWorks® virtual CAN channels
|Included in toolbox.
|MathWorks Virtual Channels
|NI™ NI-XNET CAN Devices
|“NI-XNET” available at NI-XNET Downloads.
|National Instruments CAN Interface Support
|PEAK-System CAN Devices
“Device Driver Setup Windows” available at PEAK-System Drivers.
Drivers are included in Linux Kernel.
|PEAK-System CAN Interface Support
|Follow instructions from your CAN device manufacturer.
See also Get Started with SocketCAN Devices
|Vector CAN Devices
|"Vector Driver Setup for Windows 10 and 11" available at Vector Download Center.
|Vector CAN Interface Support
Before September 2023 Vehicle Network Toolbox provided drivers in hardware support packages. All versions of the toolbox now require manual installation of the necessary drivers.
For a complete list of supported hardware, see Hardware Support.