You are now following this question
- You will see updates in your followed content feed.
- You may receive emails, depending on your communication preferences.
What is the solution to this error?
1 view (last 30 days)
Show older comments
What this error main?
.....
>> SSDBExperiment_BuildCropDataset
Error using fullfile (line 67)
All inputs must be strings, character vectors, or cell arrays of character vectors.
Error in SSDBExperiment_BuildCropDataset (line 17)
D.SaveDir = fullfile(D.Root, 'CropData');
.......
I have file with name (fullfile.m)
What should I do, which lines need change to work correctly.
Thank you in advanced.
24 Comments
Walter Roberson
on 8 Mar 2022
At the time the error shows up, what is class(D.Root) ?
Ruwaida Lawgali
on 9 Mar 2022
Structure array
Walter Roberson
on 9 Mar 2022
You cannot pass a struct array into fullfile()
Perhaps one of the fields inside D.Root is what you need.
Ruwaida Lawgali
on 9 Mar 2022
D.Root contains 6 images
DefaultRoot=load('DefaultRoot.mat'); %-->DefaultRoot
D.Root =DefaultRoot;
Walter Roberson
on 10 Mar 2022
When you use that form of load(), then the output variable DefaultRoot will be created as a struct vector with one field name for each variable stored in the .mat file.
Your code is not expecting DefaultRoot.mat to contain images: your code is expecting that it will contain a variable named DefaultRoot that is the name of the parent directory of CropData where the data is to be stored.
ResolveMissingOptions() is then used to create options.SaveDir that is what is actually used later.
Ruwaida Lawgali
on 10 Mar 2022
When I put :
D.SaveDir = fullfile('C:\Users\ALSRAYA\Desktop\codes\codeHMAX\Caltech\PNGImages\cars', 'CropData');
instead of :
D.SaveDir = fullfile(D.Root, 'CropData');
it works without errors, and gaves this result:
........
>> SSDBExperiment_BuildCropDataset
imageLabelingSession0 positives were selected
Generating the set of negative crop locations at 6 per positive...
done
saved progress in C:\Users\ALSRAYA\Desktop\codes\codeHMAX\Caltech\PNGImages\cars\CropData\MyFirstData_car_CroppingInfo.mat
Actutally cropping the data now...
FRACTION_NUM =
1
>>
..........
is it correct????
Walter Roberson
on 10 Mar 2022
That looks plausible.
Or you could leave the code the way it was but put in
D.Root = 'C:\Users\ALSRAYA\Desktop\codes\codeHMAX\Caltech\PNGImages\cars';
before D.Root is used.
Ruwaida Lawgali
on 10 Mar 2022
How can I find the next file to be run after the main file???
I have a code with 41 files.
Thank you in advanced
Walter Roberson
on 10 Mar 2022
CAfilelist.mat variable CAfilelist needs to be a cell array . Each element of the cell array must be a struct that contains a field named olistname that is used by QReadOList2 and the result of that Q* call needs to be a struct that contains a field named 'car'
But, options.UsableIndices had to be set first, and options is created by ResolveMissingOptions, which we do not have the source code for, so I do not know if D.Root is used in creating the options.
Ruwaida Lawgali
on 11 Mar 2022
ResolveMissingOptions
Ruwaida Lawgali
on 11 Mar 2022
QReadOList2
Ruwaida Lawgali
on 11 Mar 2022
I have these things.
CAfilelist.mat variable CAfilelist needs to be a cell array .
CAfilelist.mat (1x3547 cell)
...............
Each element of the cell array must be a struct that contains a field named olistname
Anno_OList\SSDB00001_olist.mat ........to n
Ruwaida Lawgali
on 11 Mar 2022
Good evening,
When I run the next file.m(ResolveMissingOptions)
I got this:
requires more input arguments to run.
........
ResolveMissingOptions(options, d)
Undefined function or variable 'options'.
........
What should I put as a defualt (options, d) =(?,?)
Thank you.
Walter Roberson
on 11 Mar 2022
It looks like options.UsableIndices is being set from the assignment
D.UsableIndices = 1:300;
If I read the code correctly, that already tells it to use the first 300 entries from CAfilelist .
I have a code with 41 files.
But your display from CAfilelist shows 3547 ?
Ruwaida Lawgali
on 11 Mar 2022
I mean when I decompressed the code, I found (41 file.m), including (SSDBExperiment_BuildCropDataset).
But
what does this mean:
But your display from CAfilelist shows 3547 ?
Thank you.
Walter Roberson
on 12 Mar 2022
I would suggest consulting the documentation that came with the code.
Ruwaida Lawgali
on 12 Mar 2022
Documentation like what.
Walter Roberson
on 13 Mar 2022
What did you get the software from? Was there no description of it?
I searched for some key function names, but I was not able to find that software anywhere, so I do not know where it is from or how it is intended to be used.
Ruwaida Lawgali
on 13 Mar 2022
Edited: Walter Roberson
on 13 Mar 2022
Well, maybe I selected an Incomplete code for HMAX.
First of all, I have studied many papers about Object Recognition.
Then, I wanted to make an execute for this subject.
So, I focused on the paper that made the first standard for HMAX(Robust Object Recognition with Cortex-Like Mechanisms)
They said:
"Both the source code of our system and the StreetScenes data set used in our experiments are readily available [16].
[16] A software implementation of the system as well as the StreetScenes data set, http://cbcl.mit.edu/software-datasets , 2006."
I downloaded the code from this site.
So, I just need to execute the HMAX code, Then add a small modification.
This thing is really important for my dissertation.
After all, can you help me to find a complete and correct code for my subject, please.
To make a comparison with other papers, I need to execute the original code, and get the accuracy.
Then, I will add a corner detection to solve the problem that found in Standard HMAX.
Thank you.
Walter Roberson
on 13 Mar 2022
I am not sure which code link you used? When I look at that site they say that HMAX was for a 1999 paper and the MATLAB code is no longer available from them.
Ruwaida Lawgali
on 13 Mar 2022
what do you think of this code ?
is it a standrd?
CBCL <cbcl-noreply@mit.edu>
The following link will be valid for 24 hours:
Walter Roberson
on 13 Mar 2022
It looks like it is layered on top of a different software package, and that most of the computation work is done in C. It looks like the work was done roughly a decade ago.
It is an unusual way of writing code, but it is possible that it fits in well with their other software package.
Ruwaida Lawgali
on 13 Mar 2022
Thank you.
Can I execute it with matlab?
Walter Roberson
on 14 Mar 2022
You would install the CNS package first and then this set of software, and then you would be able to use it from MATLAB. It defines a set of MATLAB classes and methods but does the computation in C for efficiency.
Answers (0)
See Also
Categories
Find more on Computer Vision Toolbox in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!An Error Occurred
Unable to complete the action because of changes made to the page. Reload the page to see its updated state.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)
Asia Pacific
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)