Clear Filters
Clear Filters

Time vs displacement plot of a Transfer function

8 views (last 30 days)
I am trying to plot time vs displacement plot of a transfer function. It is a simple case of spherical body in a liquid hence excitation of a spherical body is being resisted by the (elastic and viscous properties of the liquid) Hence F excitation= F inertia + F (elastic) + F viscous.
The final transfer function is of the form below where Delta Q is the relative displacement between the body and the liquid where as Vm is the excitation velocity.
I have used this transfer function to find eigen frequency for this system. Now i wants to check if the system undergoes resonance at that eigen frequency. How to do it using matlab
  7 Comments
Sam Chak
Sam Chak on 26 Apr 2024
Your computed transfer function is different for the one displayed in your comment. Would you check the details?
Also, please specify the simulation time window and provide the sinusoidal input signal Vm.

Sign in to comment.

Accepted Answer

sai charan sampara
sai charan sampara on 26 Apr 2024
Hello Hassan,
The following code might help you:
%% parameters
R = 5e-6;
zeta= 0.2308;
iota= 1.3;
rhom= 997;
rhonu = 1.3*rhom;
BoK = 8.54E-01 ;
B1u = 6.03E-07 ;
B1K = 1.42E-06 ;
B2u = 6.65E-13;
B2k = 1.31E-13;
%% coefficients in numerator
n0 = 0;
n1 = 4/3*pi*(R^3)*zeta*iota*rhom;
%% coefficients in denominator
d0 = BoK;
d1 = B1u + B1K;
d2 = B2u + B2k + (4/3*pi*(R^3)*rhonu);
%% transfer function
num = [n1 n0];
den = [d2 d1 d0];
G = tf(num, den)
G = 1.566e-13 s ----------------------------------- 1.475e-12 s^2 + 2.023e-06 s + 0.854 Continuous-time transfer function.
This gives the expression for the transfer function "G". Once the transfer function is obtained you can use the following code to obtain the eigen frequencies:
eigen_values=eig(G);
eigen_freq=abs(imag(eigen_values))
eigen_freq = 2x1
1.0e+05 * 3.2958 3.2958
<mw-icon class=""></mw-icon>
<mw-icon class=""></mw-icon>
Once the eigen frequencies are obtained you can define the input signal as a sinusoid of the eigen frequency and pass it through the system using the "lsim" function in MATLAB. This gives the output signal and the required Amplitude vs Time plot.
You can learn more about the function "lsim" from this documentation:
  2 Comments
Hassan
Hassan on 27 Apr 2024
Edited: Hassan on 27 Apr 2024
Thankyou Sam. There is one more issue, that values like B1U and B2U are dependent on frequency itself. is there anyway i can share the details of my program in private and get your opinion. as i cannot share here, it is the part of my ongoing project.
For the values i shared earlier, I found B1U and B2U after many trials to find resonant frequency of this system. I give frequency sweep signal from 10^3 to 10^ 7, and started to narrow down until I find almost accurate frequency which gave max amplitude. Is there any other way to find it directly?
Hassan
Hassan on 27 Apr 2024
Moreover, If i apply force of U=asinw(wt). where w= eigen freq., you shown me earlier, it should vibrate at increasing amplitude or growing amplitude with the time. isnt

Sign in to comment.

More Answers (0)

Tags

Products

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!