Mike Sasena, MathWorks
Powertrain Blockset™ provides fully assembled reference application models of automotive powertrains, including gasoline, diesel, hybrid, and electric systems. It includes a component library for simulating engine subsystems, transmission assemblies, traction motors, battery packs, and controller models. Powertrain Blockset also includes a dynamometer model for virtual testing. MDF file support provides a standards-based interface to calibration tools for data import.
Powertrain Blockset provides a standard model architecture that can be reused throughout the development process. You can use it for design tradeoff analysis and component sizing, control parameter optimization, and hardware-in-the-loop testing. You can customize models by parameterizing components in a reference application with your own data or by replacing a subsystem with your own model.
Recorded: 8 Mar 2017
Powertrain Blockset provides a library of automotive components as well as pre-assembled engine dynamometer and complete vehicle models for fast desktop simulation and real-time HIL testing.
The Powertrain library includes the components essential for modeling automotive systems. You can assemble these library blocks to create a complete engine subsystem. You can then connect this engine with other components to create a complete vehicle model that you can simulate under a variety of test conditions.
Powertrain Blockset also provides virtual dynamometer reference applications. You can use them to generate steady state engine maps and check if it meets requirements. For example, the initial calibration may not meet the torque command. You can use other built-in experiments to automatically calibrate inputs such as the throttle and wastegate to match the commanded torque. These virtual experiments can save you significant time by proving out the calibration procedures and creating initial calibration maps before you begin testing the real hardware.
Finally, Powertrain Blockset includes complete vehicle reference applications for fuel economy analyses and controls development. These models capture important physical effects such as turbo windup, while achieving fast simulation performance. The models are open and can be customized. You can parameterize components with your own data, look under block masks or modify the contents of a subsystem to include additional effects relevant to your project. You can even replace entire subsystems with your own models, for example, a custom drivetrain created using Simscape products. With these reference applications, you can quickly assess the impact of design changes at the system level.
For more information on Powertrain Blockset, please visit our website or select one of the options below.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .Select web site
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.