Control PR2 Arm Movements Using ROS Actions and Inverse Kinematics
Robotics System Toolbox™ supports workflows related to articulated robots. You can send commands to robotic manipulators in MATLAB®. Joint position commands are sent via a ROS action client over a ROS network. You can also calculate joint positions for a desired end-effect position. A rigid body tree defines the robot geometry and joint constraints, which is used with inverse kinematics to provide the robot with joint positions. You can then send these joint positions as a trajectory to command the robot to move.
Recorded: 8 Mar 2017
Related Products
Learn More
Featured Product
ROS Toolbox
Sélectionner un site web
Choisissez un site web pour accéder au contenu traduit dans votre langue (lorsqu'il est disponible) et voir les événements et les offres locales. D’après votre position, nous vous recommandons de sélectionner la région suivante : .
Vous pouvez également sélectionner un site web dans la liste suivante :
Comment optimiser les performances du site
Pour optimiser les performances du site, sélectionnez la région Chine (en chinois ou en anglais). Les sites de MathWorks pour les autres pays ne sont pas optimisés pour les visites provenant de votre région.
Amériques
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)
Asie-Pacifique
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)