Device Address

Enter the IP address or host name of the hardware board

Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Groups / Board Parameters

Description

The Device Address parameter defines the IP address or host name of the hardware board.

When you use the Hardware Setup wizard to update the firmware on the board, the wizard automatically gets the value of the IP address from the board and applies it to this parameter.

Settings

<empty> (default)

If you swap boards, or change the IP address of the board, get the value of the new IP address and enter it here.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b