Deployment

Build the model that loads and runs an executable on the hardware

Build a Simulink^® model, generate a standalone executable, and run it on your BeagleBone^® hardware in real-time.

Topics

Build and Run an Executable on BeagleBone Blue Hardware
Build and run executable on the hardware.
Tune and Monitor an Executable Running on BeagleBone Blue Hardware
Use your computer to monitor and control an application running on the hardware.
Stop or Restart an Executable Running on BeagleBone Blue Hardware
Stop or restart an executable running on the hardware.
Run an Executable on Remote BeagleBone Blue Hardware
Configure a model to load and run executables on a remote hardware.
Log Signals on a Hardware

Log signals from Simulink models on the hardware.
- STEP 1: Prerequisites for Logging Signals
- STEP 2: Configure Board Parameters and Enable MAT-File Logging
- STEP 3: Configure Model to Log Signals on the Hardware
- STEP 4: Run Model on the Hardware
- STEP 5: Import MAT-Files into MATLAB

Get the IP address of the hardware.

Open a Secure Shell (SSH) command-line session with hardware.

Use your computer to monitor and control an application running on the hardware.

Tune the parameters and monitor the signals of a model running on BeagleBone® Blue hardware.

Log signals from a Simulink® model on BeagleBone® Blue hardware in the MAT-file format.

Demonstrates a pedometer that counts the number of steps a person walked while holding a BeagleBone® Blue hardware.