Model LC ladder networks
RF Blockset / Circuit Envelope / Elements
The LC Ladder block models common two-port LC lossless networks. To learn how you can use LC Ladder to compare the input and output signal amplitudes to study the signal attenuation, see Model RF Filter Using Circuit Envelope.
Ladder topology — Type of ladder topology
LC Lowpass Tee (default)
Type of ladder topology, specified as one of the following:
|LC Lowpass Tee|
|LC Lowpass Pi||
|LC Highpass Tee||
|LC Highpass Pi||
|LC Bandpass Tee||
|LC Bandpass Pi||
|LC Bandstop Tee||
|LC Bandstop Pi||
Inductance — inductance values
[1.3324e-5 1.3324e-5] H (default) | real number
Inductance value, specified as a real number in Henries. Specify the units of the inductance from the corresponding drop-down menu.
Capacitance — Capacitance value
1.1327e-9 F (default) | real number
Capacitance value, specified as a real number in Farads. Specify the units of the capacitance from the corresponding drop-down menu.
Ground and hide negative terminals — Internally ground and hide the negative terminals
on (default) |
Select this option to internally ground and hide the negative terminals. Clear this to expose the negative terminals. By exposing these terminals, you can connect them to other parts of your model.
Introduced in R2015b