Connectors and References
Grounds, neutral ports, phase splitters, multiplexers
Use connector blocks for grounding and to terminate, separate, and combine signals.
Simscape Blocks
| Cable and Connectors | Cable and connectors with optional fault modeling (Since R2024b) |
| Busbar | Load flow analysis busbar connector |
| Busbar (DC) | Load flow analysis DC busbar connector (Since R2022a) |
| Delta Reference (Three-Phase) | Internal reference point for delta-connected network |
| Electrical Reference | Connection to electrical ground |
| Floating Neutral (Three-Phase) | Internal floating neutral point for wye-connected network |
| Floating Reference | Reference for measuring voltage of other nodes in floating electrical network (Since R2023b) |
| Grounded Neutral (Three-Phase) | Connect phases of three-phase system to electrical reference |
| Neutral Port (Three-Phase) | Connect phases of three-phase system to electrical conserving port |
| Open Circuit | Electrical port terminator that draws no current |
| Open Circuit (Three-Phase) | Three-phase terminator that draws no current |
| Phase Permute | Permute phases of three-phase system |
| Phase Splitter | Expand or combine three electrical conserving ports |
| PS Three-Element Demux | Convert three-element physical signal vector into scalar physical signals |
Topics
- Essential Electrical Modeling Techniques
Apply Simscape™ modeling rules when you build electronic, mechatronic, and electrical power system networks using Simscape Electrical™.
- Three-Phase Ports
Connect three-phase blocks using composite ports for three-phase lines or expanded ports for single-phase lines.







