Neutral
Implement common node in circuit
Library
Simscape / Electrical / Specialized Power Systems / Utilities
Description
The Neutral block implements a common node with a specific node number. You can use this block to create a floating neutral or to interconnect two points without drawing a connection line.
Parameters
- Node number
Specify a number of the neutral node. If the Node number parameter is set to
0
, the Neutral block makes a connection to ground. The node number is displayed next to the block icon. Default is10
.
Examples
The power_neutral
example uses three Neutral blocks. One Neutral block
is used to refer a Voltage Measurement block to the ground (node 0).
See Also
Version History
Introduced before R2006a