Clear Filters
Clear Filters

Matlab Udp Send Resource Temporarily Unavailable Error

14 views (last 30 days)
Matlab communicates with the microcontroller via Ethernet. Approximately 12-13 UDP blocks are running, but after a while after the simulation runs, the same UDP block always gives the "resource is temporarily unavailable" error. Even though I changed the port, the error persists. Sometimes this error appears after a very long time, sometimes after a short time. What could be the reason for this?

Accepted Answer

Shubham
Shubham on 22 Aug 2024
Hi Talha,
The "resource is temporarily unavailable" error in a UDP communication context typically indicates that the UDP socket is unable to read or write data at a given time. This issue can arise due to several reasons, particularly when dealing with real-time communication between MATLAB and a microcontroller over Ethernet. Here are some potential causes and solutions:
Potential Causes:
  1. If the network is congested, packets may be delayed or lost, leading to temporary unavailability.
  2. If the data is being sent or received faster than it can be processed, buffers may overflow, causing this error.
  3. Although you mentioned changing the port, ensure that no other processes are using the same port simultaneously.
  4. Security settings on your computer or network might intermittently block or throttle UDP traffic.
  5. The microcontroller might not be able to handle the data rate or number of concurrent connections.
  6. Incorrect configuration of UDP blocks in MATLAB, such as buffer size or timeout settings.
Solutions:
  1. Ensure that the buffer sizes for both the sending and receiving ends are sufficiently large to handle peak data loads.
  2. Increase the timeout settings in your UDP configuration to allow more time for data processing.
  3. Reduce the data rate if possible, or implement a flow control mechanism to match the processing capabilities of the microcontroller.
  4. Ensure that your network configuration is optimized for real-time communication. This includes checking for any settings in routers or switches that might throttle UDP traffic.
  5. Use network monitoring tools to check for congestion or packet loss that might indicate network issues.
  6. Implement robust error handling in your MATLAB code to gracefully handle temporary unavailability and attempt reconnections.
  7. Test the communication with a simpler setup (e.g., fewer UDP blocks) to identify if the issue is related to the number of connections or data rate.

More Answers (0)

Categories

Find more on Deployment, Integration, and Supported Hardware in Help Center and File Exchange

Products


Release

R2022b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!