Making Pulse sequence with if commands in Embeded MATLAB Function in simulink

Hello. I have written a code which makes a pulse pattern. It has a repetitive sawtooth time input that ensures the pulse pattern to be periodic. Times of pulse transitions are given to Matlab function as inputs and the pulse pattern is made using two condition if (if a<b && b<c which b is the instantaneous time of the pulse and a,c are the start and end of pulse segment.) Here is a snapshot of my code:

Here is a snapshot of my simulink blocks:

and finally, here is my output:

Now my question is: I do not expect that (for example) the third segment of the output pulse has the value of 0.03, I expect it as 0.01. because in the matlab function, on the third case, my output should be u4-u3, which u4=0.035 and u3=0.025, then, my output should be 0.01 (not 0.03).

I appreciate your help

I have attached the mdl file for more information.

Answer 1

[Purushottama Rao]

When U1 is between u4 and u5, y=u5-u4=0.065-0.035

That is why you have 0.03 magnitude at your output

Answer 2

[vahid]

Here is my mdl file (that I forgot to attach)

[Purushottama Rao]

Attach the model using 'Attch file' option. Or can you give your sawtooth wavefrom??

[vahid]

Hello Mr Purushottama Rao, thanks for your comment, I have attached the model a comment before your comment. Here is my sawtooth signal that is a periodic one with T=0.1 s and min value of 0 and peak value of 0.1, in order to represent a periodic time (clock) function.

Answer 3

[vahid]

Sorry sir, you are right. I considered the 0.1 output as a single if state, while actually it was two consecutive if statestates. I really appreciate your help.