Plotting the solution of multi-variable non-linear equations (solved using fsolve).
2 views (last 30 days)
Show older comments
These are the equations:
function [fval]= ptfunc(X)
Tcell=X(1);
Pcell=X(2);
Qh=X(3);
Pteg=X(4);
alpha = 0.95;
A = (0.04)^2;
epsilon = 0.88;
sigma = 5.69*10^(-8);
Ta = 298.15;
u=(0.003+1/5)^-(1);
ns = 0.10;
theta = 0.0011;
An=6.4*10^-7;
Hn=0.01;%:0.01:0.06;
N=62;
S=185*10^-6;
rho=10^-5;
den=2*rho;
k=1.5;
Z=(S^2)/(rho.*k);
Tc=298;
r=0.2;
n=0.0001;
hc=0.00009;
num2=2*r*hc;
G=500;
fval(1,1)= -Qh+ alpha*G*A-u*A*(Tcell-Ta)-epsilon*sigma*A*((Tcell.^4)-(Ta^4))-Pcell;
fval(2,1)= -Pcell+ alpha*G*A*ns.*(1-theta.*(Tcell - 298));
fval(3,1)= -Qh + (k*An*N/Hn)*(1-Z*(3*Tcell+Tc)/8)*(Tcell-Tc);
fval(4,1)= -Pteg+(S^2)*An*N*((Tcell-Tc)^2)./(den.*(n+Hn).*(1+num2./Hn).^2);
I need to plot the varaibles with respect to G. How do I do that?
2 Comments
Stephan
on 9 Apr 2019
G is a scalar - its value is 500 - so you would plot 4 single points - one for each result from fsolve. Is this what you want to do?
Accepted Answer
Torsten
on 9 Apr 2019
function main
G = linspace(250,750).';
X0 = [1,1,1,1];
for i=1:numel(G)
sol = fsolve(@(X)ptfunc(X,G(i)),X0);
x(i,:) = sol;
X0 = sol;
end
plot(G,x(:,1))
end
function fval = ptfunc(X,G)
Tcell=X(1);
Pcell=X(2);
Qh=X(3);
Pteg=X(4);
alpha = 0.95;
A = (0.04)^2;
epsilon = 0.88;
sigma = 5.69*10^(-8);
Ta = 298.15;
u=(0.003+1/5)^-(1);
ns = 0.10;
theta = 0.0011;
An=6.4*10^-7;
Hn=0.01;%:0.01:0.06;
N=62;
S=185*10^-6;
rho=10^-5;
den=2*rho;
k=1.5;
Z=(S^2)/(rho.*k);
Tc=298;
r=0.2;
n=0.0001;
hc=0.00009;
num2=2*r*hc;
%G=500;
fval(1,1)= -Qh+ alpha*G*A-u*A*(Tcell-Ta)-epsilon*sigma*A*((Tcell.^4)-(Ta^4))-Pcell;
fval(2,1)= -Pcell+ alpha*G*A*ns.*(1-theta.*(Tcell - 298));
fval(3,1)= -Qh + (k*An*N/Hn)*(1-Z*(3*Tcell+Tc)/8)*(Tcell-Tc);
fval(4,1)= -Pteg+(S^2)*An*N*((Tcell-Tc)^2)./(den.*(n+Hn).*(1+num2./Hn).^2);
end
4 Comments
Walter Roberson
on 10 Apr 2019
However, it is working. The reason it does not look like it is working is that one of the results is on the order of 300, and two of them are on the order of 0.1, and the last of them is on the order of 0.01 . You simply cannot see anything in 3 of the 4 lines because they are insignificant on the scale of the first plot.
You could use subplot() to break the values out.
If you have a new enough MATLAB you could use stackedplot()
More Answers (0)
See Also
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!