RDSAC and MKSAC: read and write SAC seismic data file

Imports/plots and exports seismic data file in the IRIS/SAC format.

Matlab codes to read and write SAC seismic data file

GAOT-ECM Seismic Vibration Case Study

GAOT-ECM: Extension For Control And Modeling - Seismic Vibration Case Study with MR Damper

industrial plant identification and PID controller design.This file contains the Seismic Vibration Case Study. For other examples, please consult the GAOT-ECM: Extension For Control And Modeling main file.This

SDOF subjected to a seismic input

This is the study of a SDOF subjected to a seismic input

Dynamic response of a building subject to a seismic input

Dynamic response of a building subject to a seismic input

The script analizes the dynamic response of a linear system subject to a seismic input through the Response History Analysis (RHA) and the Response Spectrum Analysis (RSA).After the calculations

Large Data in MATLAB: A Seismic Data Processing Case Study

These are the files used in the webinar on Feb. 23, 2011.

You can watch the archived version of this webinar at http://www.mathworks.com/videos/large-data-in-matlab-a-seismic-data-processing-case-study-81792.html (recommended). The demos show how to manage

ANSeismic – Seismic Analysis of Structures with ANSYS and SAP2000

The seismic analysis in ANSYS may be implemented with ANSeismic

acceleration–time history data are used for seismic analysis. Such time histories may be derived synthetically, by either numerical simulation of the source and wave propagation mechanisms, or by considering proper

Radiation pattern from shear-tensile seismic source

Calculates P, S, SV and SH radiation pattern using shear-tensile seismic source model.

and azimuth.[1] Kwiatek, G. and Y. Ben-Zion (2013). Assessment of P and S wave energy radiated from very small shear-tensile seismic events in a deep South African mine. J. Geophys. Res. 118, 3630-3641

SeisLab 2.01

Release 6.1925 of a collection of functions for analysis/display of seismic and well-log data.

geoscience-community-codes/GISMO

GISMO - a framework for scientific research in seismology/infrasound

Project website: https://geoscience-community-codes.github.io/GISMOGISMO is designed to allow easy retrieval of seismic waveform data, event catalogs and station metadata from a variety of data

FDTD simulation for Seismic Metamaterials (Crystals)

Finite-Difference Time-Domain (FDTD) simulation for Seismic Metamaterials (Crystals) Design for Earthquake Shield Applications

Finite-Difference Time-Domain (FDTD) simulation for 2D Seismic Metamaterials (Crystals) Design for Seismic Wave Isolation Researchs.For more details for Seismic Crystal(Metamaterials

Seismic Response Spectrum GUI

This script aims to offer the Shock Response Spectrum of an earthquake's acceleration time history

Irvine in 2006 as one of the eligible calculation methods.- For further information, please relate to the document "SeismicResponseSpectrumGUI.pdf" included in the .zip file.

VPSHA

VPSHA: Vector-valued probabilistic seismic hazard analysis for circular seismic sources

This MATLAB function conducts a vector-valued probabilistic seismic hazard analysis (VPSHA) by making use of the truncated Gutenberg-Richter recurrence model. It considers only a uniform circular

M-band 2D dual-tree (Hilbert) wavelet multicomponent image denoising

Denoise multicomponent/color images with directional M-band dual-tree (Hilbert) wavelets

seismic phase selection

select the seismic phase from your interesting point

This code will help filter the depth, magnitude, and distance range of seismic waves that you desire. You can filter the phases you want from this code, and it will tell you how many events will

Seismic Survey Scheduler

Simulates a seismic survey over a rectangular grid of area x by y meters

Seismic surveying requires placing a large number of sensors (geophones) in a large grid pattern, triggering a seismic event, and recording accelerometer readings at each sensor. These readings are

seismicparam

Calculates seismic parameters from an acceleration time series

This function calculates seismic parameters from an acceleration time series. Specifically, it calculates velocity vs time, displacement vs time, peak ground acceleration (PGA), peak ground velocity

Seismic Waves Propagation

Simulation of particle motion during the propagation of seismic waves

Simulation of particle motion during the propagation of seismic wavesv1.0.2Odysseus Galanisogalanis.webpages.auth.grUpdated for Matlab R2025a in 2026*Originally written in 2007 to produce images for

cqwva( d,y,x,index_incre,lvl,clip,line_color,face_color,mode , trace_balance )

The fastest wiggle variable area seismic data plotting function after comparison.

Matlab tools for geophysical (mainly exploration seismic) interpretation and processing

SHAppE: Seismic HAzard Parameters Evaluation Interface

SHAppE facilitates probabilistic assessment of time dependent seismic hazard parameters.

# SHAppE: Seismic HAzard Parameters Evaluation App[![View Standard-Climate-Colormaps-for-MATLAB on File

DynamicLinear-Seismic-Analysis-2DFrames

Functions and subroutines for the Dynamic Linear Seismic Analysis (Time-History) of 2D Frames

DynamicLinear-Seismic-Analysis-2DFramesFunctions and subroutines for the Dynamic Linear Seismic Analysis (Time-History) of 2D Frames

SGE-2 seismic data file importer

A Matlab function to import seismic traces as data blocks from an SGE-2 file.

Just executeData = importSGE2(filename)where filename is a string containing the path and name of the SGE-2 file.Seismic traces and their metadata are output as elements of lists. For example

Static-Seismic-Modal-Analysis-3DFrames

Functions and subroutines for the Static Seismic Modal analysis of 3D Frames

Static-Seismic-Modal-Analysis-3DFramesFunctions and subroutines for the Static Seismic Modal analysis of 3D Frames

Static-Seismic-Modal-Analysis-2DFrames

Subroutines and functions for the Static Seismic Modal Analysis of 2D Frames

Static-Seismic-Modal-Analysis-2DFramesSubroutines and functions for the Static Seismic Modal Analysis of 2D Frames

Dynamic-Time-History-Seismic-Anlaysis-3DFrames

Functions and routines for the dynamic inelar seismic analysis of 3D (Time-History)

Dynamic-Time-History-Seismic-Anlaysis-3DFramesFunctions and routines for the dynamic inelar seismic analysis of 3D (Time-History)

Fetch Files from SAGE Seismic Data Website

A workflow for automatically downloading data from the SAGE (formerly IRIS) seismic data website via their IRISWS interface

and/or contact Lkeen@mathworks.com# Fetch Files from SAGE Seismic Data Website [![Open in MATLAB

Multi-scale Multi-label Seismic-sample Collection

Multi-scale 3D well-seismic label classification extraction and high-dimensional feature analysis

Response Spectra

Given the Seismic input in t vs. a form, plots the displacement response spectra

In the context of seismic analysis of structures, various earthquake inputs may be required depending upon the nature of analysis being carried out. The response spectrum of an earthquake is the most

Wedge Model

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/blob/master/Forward%20modeling/seismic_wedge_model.mCite: Anugerah, Nisfu; Ginting, Gamaliel Rhema; Wicaksono, Gigih Aji; Salsabila, Alda; Subakti, Puguh Ari; Syahputra, Loris Alif (2018): Membuat Model Sintetik untuk Model Pembajian. figshare

Seismic Analysis - Response Spectrum Analysis for MDOF System

Response Spectrum Analysis for MDOF System

The purpose of this study is to develop a seismic analysis of MDOF Structure based on Response Spectrum Method. This analysis tool is written in MATLAB software to determine structural responses or a

Seismic Data Processing "SedPro"

Analysis of Colombian ground motion records Javier Ardila & Angélica Fernández W Project advisors : Professors José Benjumea & Gustavo Chio

SedPro: This code allows the treatment, processing and calculation of seismic signal parameters.NewmarkRS and FFTsignal: complementary functions for the code

SeisLab 3.02

Release 15.09.21 of a collection of functions for analysis/display of seismic and well-log data.

A set of about 170 functions (plus support functions called by them) for analysis and display of exploration-seismic data and well logs. These functions read and write seismic data in standard SEG-Y

Seismic Traveltime modeling by EGMA

This method accurately approximates full-offset ray-traced traveltimes in a CMP acquisition, using only two rays.

P-PHASE ARRIVAL TIME PICKER BASED ON AKAIKE INFORMATION CRITERION

Computes P-phase arrival time in windowed digital single-component seismic recording using AIC

Visualisasi Data Seismik 2D

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/edit/master/seismic%20processing/seismic_visualisasi.mCite: Virginia, Intang Pinki; Arahman, Nanditha; Laurens, Kinta Rahma Aulika; Pertiwi, Tiaraningtias Bagus; Suryani, Adelia (2018): Visualisasi Data Seismik 2 Dimensi. figshare

Minimal Path Sets Seismic Reliability Evaluation of Lifeline Networks with Link and Node Failures

Minimal Path Sets Seismic Reliability Evaluation of Lifeline Networks with Link and Node Failures

Elastic and Inelastic Seismic Response Spectra

Calculation of elastic and inelastic spectra, given the gound acceleration, damping and ductility.

First Break Picking Data Seismik Refraksi

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/edit/master/seismic%20processing/seismic_first_break.mCite: Yasir, Moh.; Haq, M. Syauqil; Lase, Fanzly Togap Zisochi; Sena, Ariestian; Ilmi, M. Wildi Nurul; Sestha, Andrata Ganesha (2018): First Break Picking Data Seismik Refraksi. figshare

Spektrum Data Seismik Sebagai Fungsi Kedalaman

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/edit/master/seismic%20processing/seismic_data_spektrum.mCite: Aisy, Safira Rihhadatul; Elsalama, Nadiah Faridah Firdausi; Anugrah, Sari Atika; Nabila, Afviya; Nugraha, Rama Desta (2018): Spektrum Data Seismik sebagai Fungsi Kedalaman. figshare

Bandpass Filter untuk Data Seismik

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/edit/master/seismic%20processing/seismic_bandpass_filter.mCite: Hidayat, Lutfi Nur; Syafrudin, Taufan Rifqi; Suwesti, Angreani; Khakim, Umar Abdul; Astuti, Mega Dwi; Hanafi, Mochammad Ibnu (2018): Bandpass Filter pada Data Seismik. figshare

Mencari Kecepatan dan Kedalaman Gelombang Seismik Refraksi

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/edit/master/seismic%20processing/seismic_velocity_depth.mCite: Wirantara, Putu Pasek; Nagara, Jeremy Adi Padma; Purwakusuma, Rachenda Pandu; Rahmah, Tazkia; Christofel, David (2018): Mencari Kecepatan dan Kedalaman Gelombang Seismik Refraksi. figshare

MASW Dispersion Curve

Script to calculate the seismic dispersion curve commonly used in MASW with curve picking options

"IMAGE2SEGY": Raster to SEG-Y Converter

Transforms raster image ( jpg, bmp, tif,..) to time-scaled & geo-referenced SEG-Y file.

Actual link is http://gma.icm.csic.es/node/67 IMAGE2SEGY transforms raster images of seismic records on paper or film to geo-referenced Seg-Y files, compatible with "Kingdom-Suite", "Promax", "SeiSee

SeisLab 3.01

Release 10.0301 of a collection of functions for analysis/display of seismic and well-log data.

A set of about 170 functions (plus support functions called by them) for analysis and display of exploration-seismic data and well logs. These functions read and write seismic data in standard SEG-Y

Wiggle

WIGGLE displays a matrix as lines plus filled lobes, useful for oscillatory and/or seismic data.

provide a visual analysis of seismic and seismological data, or any other vibration data, in order to help the identification of events that can be stressed out with the coherent alignment of lobes

Elastic Response Spectrum

This function generates elastic response spectrum for seismic design of buildings and bridges.

SeReM

Seismic Reservoir Modeling package

Seismic Reservoir Modeling MATLAB packageThe SeReM package includes five folders:Data: this folder contains six datasets used for the examples and the elevation dataset from Yellowstone National

Wavelet Scale Spectra

Compute wavelet scale spectra from segmented discrete wavelet transform (Screenshot).

SAC_Sun2PC_mat

This is utility to read SAC (Seismic Analysis Code) binary files created on/for SUN platform.

Seis_Pick

Seis_Pick provides an interactive picking environment for processing seismic data.

Seis_pick provides an interactive environment for picking seismic waveforms. It has been developed with the principal purpose of processing downhole microseismic data, although is suitable for all

DSHA

Classic Deterministic Seismic Hazard Assessment

The calculation of the seismic hazard was based on assuming here the occurrence of a large earthquake of a certain magnitude at a specific location that affects the site where the motion assessment

OpenSeismoMatlab

Software for strong ground motion data processing

squiggle

SQUIGGLE stacked-line plot, typically used for plotting seismic and radar profiler data.

SQUIGGLE stacked-line plot, typically used for plotting seismic and radar profiler data.SQUIGGLE(Z) is a squiggle plot of each column in the matrix Z. Each value in Z is scaled to the maximum

normalized-spectrogram

Normalized spectrogram of a seismic acceleration

Normalized spectrogramNormalized spectrogram of a seismic accelerationNormalized spectrogram to seismic acceleration written in Matlab. The algorithm used is the following:1. Baseline

Okada solution

Computation of co-seismic displacements due to a rectangular dislocation in an elastic half-space.

Computation of static co-seismic displacements due to a dislocation-type deformation in a half-spaceDescription: This exact solution is often used to construct co-seismic displacements due to an

slepian_oscar

Seismic and GPS processing bits and pieces

Seismic processing bits and pieces. Note that you may need to hunt for dependencies in some of the other slepian_alpha, slepian_bravo, etc, packages.

B3AM

Beamforming toolbox for three-component seismic noise

providing estimates of surface wave dispersion curves, frequency-dependent wavefield composition, and the direction of arrival for different wave types and frequencies from ambient seismic noise. Compared to

DNN ELM SAE DAE

Deep Neural Networks, Stacked Auto Encoder, and Deep Auto Encoder with Extreme Learning Machine

Please citeNuha, Hilal H., Adil Balghonaim, Bo Liu, Mohamed Mohandes, Mohamed Deriche, and Faramarz Fekri. "Deep Neural Networks with Extreme Learning Machine for Seismic Data Compression." Arabian

Dynamic-NonLinear-SeismicAnalysis-2DFrames

Functions and subroutines for the Non-Linear Dynamic (Time-History) Seismic analysis of 2D Frames

Dynamic-NonLinear-SeismicAnalysis-2DFramesFunctions and subroutines for the Non-Linear Dynamic (Time-History) Seismic analysis of 2D Frames

Dynamic-NonLinear-SeismicAnalysis-3DFrames

Functions and subroutines for the Non-Linear Seismic Analysis of 3D Frames with the Newmark-Beta method

Dynamic-NonLinear-SeismicAnalysis-3DFramesFunctions and subroutines for the Non-Linear Seismic Analysis of 3D Frames with the Newmark-Beta method

HaizhaoYang/SynLab

Multidimensional Synchrosqueezed Transforms

superposition.3D synchrosqueezed wave packet transform. Applications:Geophysics: seismic wave field separation and ground-roll removal.Materials science: atomic crystal image analysis, grain boundary and local