Answered

how to run the matlab code step-by-step?

Use the debugger. See <http://www.mathworks.com/help/releases/R2011a/techdoc/matlab_env/f2-4931.html Editing and Debugging MATLA...

how to run the matlab code step-by-step?

Use the debugger. See <http://www.mathworks.com/help/releases/R2011a/techdoc/matlab_env/f2-4931.html Editing and Debugging MATLA...

10 years ago | 3

Answered

the use of the linear quadratic requlator method in the state space controller and observer design

The matrices R and Q are essentially design parameters or weights that you have to choose as part of the control system design, ...

the use of the linear quadratic requlator method in the state space controller and observer design

The matrices R and Q are essentially design parameters or weights that you have to choose as part of the control system design, ...

10 years ago | 0

| accepted

Answered

How can one get Block Choices for a Configurable Subsystem in an array by using Matlab Command?

get_param(gcb,'BlockChoice') will give you the current block choice for the block. get_param(gcb,'MemberBlocks') wi...

How can one get Block Choices for a Configurable Subsystem in an array by using Matlab Command?

get_param(gcb,'BlockChoice') will give you the current block choice for the block. get_param(gcb,'MemberBlocks') wi...

10 years ago | 1

| accepted

Answered

Variable orifice

Yes, I see the same error in R2009b. The problem is with the pressure differential values, you only provide two values and the <...

Variable orifice

Yes, I see the same error in R2009b. The problem is with the pressure differential values, you only provide two values and the <...

10 years ago | 0

Answered

How I can model the limit of the speed and acceleration using a Simulink block?

Presumably, you're feeding your valve block with a signal representing the opening of the valve. How is that signal generated? ...

How I can model the limit of the speed and acceleration using a Simulink block?

Presumably, you're feeding your valve block with a signal representing the opening of the valve. How is that signal generated? ...

10 years ago | 1

Answered

Difference between Simulink Coder, Embedded Coder and Matlab Coder

MATLAB Coder is used to generate ANSI C/C++ code from MATLAB and is a pre-requisite for Simulink Coder and Embedded Coder. Simul...

Difference between Simulink Coder, Embedded Coder and Matlab Coder

MATLAB Coder is used to generate ANSI C/C++ code from MATLAB and is a pre-requisite for Simulink Coder and Embedded Coder. Simul...

10 years ago | 9

Answered

Exporting NX (Unigraphics) models to SimMechanics

As you found out, NX is not supported out of the box. However, there is an <http://www.mathworks.com/help/releases/R2011a/toolbo...

Exporting NX (Unigraphics) models to SimMechanics

As you found out, NX is not supported out of the box. However, there is an <http://www.mathworks.com/help/releases/R2011a/toolbo...

10 years ago | 0

| accepted

Answered

translational body spring damper system with friction

Hi, Looking at your model, I would make the following comments: * This is a numerically stiff system, so use a stiff solve...

translational body spring damper system with friction

Hi, Looking at your model, I would make the following comments: * This is a numerically stiff system, so use a stiff solve...

10 years ago | 1

| accepted

Answered

Problem to resolve algebraic loop

Put the transfer function between the voltage measurement block and the Simulink - PS Converter block, or between the PS - Simul...

Problem to resolve algebraic loop

Put the transfer function between the voltage measurement block and the Simulink - PS Converter block, or between the PS - Simul...

10 years ago | 1

Answered

Help in Solver error

It really isn't difficult, you need to start thinking... The following is pretty self-explanatory: <<https://lh6.googleuserco...

Help in Solver error

It really isn't difficult, you need to start thinking... The following is pretty self-explanatory: <<https://lh6.googleuserco...

10 years ago | 2

Answered

Simulink Coder(RTW) can be purchased separately without having entire Matlab software?

For Simulink Coder, you need MATLAB, MATLAB Coder and Simulink (unless you already have those, in which case you can add Simulin...

Simulink Coder(RTW) can be purchased separately without having entire Matlab software?

For Simulink Coder, you need MATLAB, MATLAB Coder and Simulink (unless you already have those, in which case you can add Simulin...

10 years ago | 0

Answered

matlab 2011

Ask the IT department of your university what's the best way for you to access MATLAB, they may have some licenses available for...

matlab 2011

Ask the IT department of your university what's the best way for you to access MATLAB, they may have some licenses available for...

10 years ago | 0

Answered

Varying parameters During a simulation

Also have a look at <http://www.mathworks.com/matlabcentral/fileexchange/24294-simulink-signal-viewing-using-event-listeners-and...

Varying parameters During a simulation

Also have a look at <http://www.mathworks.com/matlabcentral/fileexchange/24294-simulink-signal-viewing-using-event-listeners-and...

10 years ago | 1

| accepted

Answered

Sampletime/rate from mask Initialization

Have you tried: get_param(gcb,'CompiledSampleTime') HTH, Arnaud

Sampletime/rate from mask Initialization

Have you tried: get_param(gcb,'CompiledSampleTime') HTH, Arnaud

10 years ago | 0

Answered

How could you find the index number of an answer output?

[max_value, max_idx] = max(drhodz) The index |ii| corresponding to the maximum value |max_value| is given by |max_idx|. ...

How could you find the index number of an answer output?

[max_value, max_idx] = max(drhodz) The index |ii| corresponding to the maximum value |max_value| is given by |max_idx|. ...

10 years ago | 0

| accepted

Answered

Plotting 3D graph using measured points

Maybe try <http://www.mathworks.com/help/releases/R2011a/techdoc/ref/plot3.html |plot3|>. Arnaud

Plotting 3D graph using measured points

Maybe try <http://www.mathworks.com/help/releases/R2011a/techdoc/ref/plot3.html |plot3|>. Arnaud

10 years ago | 1

| accepted

Answered

Where can I find information on CCS IDE versions that can be supported with Embedded Coder?

<http://www.mathworks.co.uk/products/embedded-coder/ti-adaptor.html> HTH, Arnaud

Where can I find information on CCS IDE versions that can be supported with Embedded Coder?

<http://www.mathworks.co.uk/products/embedded-coder/ti-adaptor.html> HTH, Arnaud

10 years ago | 0

| accepted

Answered

TLC file syntax help?

Have you read the documentation on <http://www.mathworks.com/help/releases/R2011a/toolbox/rtw/tlc/bp6j4co.html Target Language C...

TLC file syntax help?

Have you read the documentation on <http://www.mathworks.com/help/releases/R2011a/toolbox/rtw/tlc/bp6j4co.html Target Language C...

10 years ago | 1

| accepted

Answered

Photovoltaic MPPT fuzzy logic in Matlab/Simulink

If your signal is discrete, you can use the <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/slref/difference.htm...

Photovoltaic MPPT fuzzy logic in Matlab/Simulink

If your signal is discrete, you can use the <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/slref/difference.htm...

10 years ago | 0

| accepted

Answered

sample time mismatch

One of your busses has a continuous sample time, while the other one a discrete sample time of 1s. Use a <http://www.mathworks.c...

sample time mismatch

One of your busses has a continuous sample time, while the other one a discrete sample time of 1s. Use a <http://www.mathworks.c...

10 years ago | 2

Answered

Transfer data wireless

You can maybe use the <http://www.mathworks.com/help/releases/R2011a/toolbox/instrument/tcpipsend.html TCP/IP Send> and <http://...

Transfer data wireless

You can maybe use the <http://www.mathworks.com/help/releases/R2011a/toolbox/instrument/tcpipsend.html TCP/IP Send> and <http://...

10 years ago | 1

Answered

How do I run a simulation with a transfer function block and a multi dimensional input ?

The transfer function block only supports scalar input signals, hence the error, see the <http://www.mathworks.com/help/releases...

How do I run a simulation with a transfer function block and a multi dimensional input ?

The transfer function block only supports scalar input signals, hence the error, see the <http://www.mathworks.com/help/releases...

10 years ago | 0

Answered

Simulink Design Optimisation

If you want to inject your measured input data in the model, use one or more root-level <http://www.mathworks.com/help/releases/...

Simulink Design Optimisation

If you want to inject your measured input data in the model, use one or more root-level <http://www.mathworks.com/help/releases/...

10 years ago | 0

Answered

Doubt in SOC of battery

The SOC is calculated as follows (see <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/battery.html B...

Doubt in SOC of battery

The SOC is calculated as follows (see <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/battery.html B...

10 years ago | 0

Answered

Help in my model

What is the value of your resistance and what's the amplitude of your current source? I suspect current's still flowing through ...

Help in my model

What is the value of your resistance and what's the amplitude of your current source? I suspect current's still flowing through ...

10 years ago | 0

| accepted

Answered

How to generate .m file from SIMULINK model (.mdl file)?

As Andreas suggested, use the <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/slref/sim.html |sim|> command to r...

How to generate .m file from SIMULINK model (.mdl file)?

As Andreas suggested, use the <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/slref/sim.html |sim|> command to r...

10 years ago | 1

Answered

Help to understand generic battery model

I think the second one is correct. The first one would be correct too if the - port was grounded (which it isn't). HTH, Ar...

Help to understand generic battery model

I think the second one is correct. The first one would be correct too if the - port was grounded (which it isn't). HTH, Ar...

10 years ago | 0

| accepted

Answered

Doubt in Ideal Switch

Are you referring to the <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/idealswitch.html Ideal Swit...

Doubt in Ideal Switch

Are you referring to the <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/idealswitch.html Ideal Swit...

10 years ago | 1

Answered

Problem with connection

Just use a <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/seriesrlcbranch.html Series RLC Branch> i...

Problem with connection

Just use a <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/seriesrlcbranch.html Series RLC Branch> i...

10 years ago | 3

Answered

Connecting to xPC Target machine takes too long time

I would suggest <http://www.mathworks.co.uk/support/service_requests/contact_support.do contacting technical support>. HTH, ...

Connecting to xPC Target machine takes too long time

I would suggest <http://www.mathworks.co.uk/support/service_requests/contact_support.do contacting technical support>. HTH, ...

10 years ago | 0