Answered
SMES
To model SMES would require more components than a simple inductor but that depends about what level of fidelity is needed. Ther...

3 years ago | 0

Answered
Motor rating (KW) in EV reference application
The electric motor has a maximum power of 211 kW and maximum torque 450 Nm. I hope this helps.

3 years ago | 0

| accepted

Answered
Tuning block parameters at each time step in Simscape Electrical
In Simscape Electrical it will not work in the same way as in Simulink. See more About Simscape Run-Time Parameters. In Simscape...

3 years ago | 0

| accepted

Answered
Phase change simulation with SimPowerSytems
Probably best to use a single Variable Capacitor which is controlled by the output of the MATLAB function.

3 years ago | 0

Answered
fuel cell
If the block allows to look under mask (CTRL+U) then the implementation can be seen. If the block is part of a specific library ...

3 years ago | 0

Answered
sim power systems
This is the phase angle of the internal voltage generated by phase A, in degrees.

3 years ago | 0

Answered
Synchronous Generator
Without a model is hard to point to a root cause. May be due to incorrect connection of the measurement block.

3 years ago | 0

Answered
PWM block
This logic can be implemented using standard Simulink blocks. The Universal Bridge can be configured to use 1 arm to act as a H ...

3 years ago | 0

Answered
The result of AC current output is abnormal in electric circuit simulation using Simulink
This appears to be related to how the solver computes the step size. By explicitly setting the ‘Max step size’ in the Configurat...

3 years ago | 0

| accepted

Answered
How to Connect From blocks to Three phase VI measurement block?
You cannot directly connect Simulink signals to power signals. I assume you want to feed the phase currents to the electrical ci...

3 years ago | 0

Answered
Problems with generating AC waves
This circuit works fine on my computer. Without a model is hard to give any advice. First thing I would double check is that 'Pe...

3 years ago | 0

Answered
Linking Table based battery's SOC ports together
There is no out of the box way to mux physical signals. The solution is to use individual PS-to Simulink Converters and then mux...

3 years ago | 0

Answered
How to get voltage profile in case33bw MATPOWER
MATPOWER is a package of free, open-source MATLAB-language files. It is not developed by MathWorks so would be better to check t...

3 years ago | 0

Answered
Multiple electrical references in Simulink/Simscape
You need one Solver Configuration block per phyiscal network. If you have pure Simulink blocks used to connect different parts o...

3 years ago | 0

| accepted

Answered
Getting error while connecting the DC-DC Converter block for PMSM Drive model
It appears to have missed an electrical reference. We don't have the model to give precise advice but I would try to add an Elec...

3 years ago | 0

Answered
How can I use MOSFET's model in simscape?
Simscape Electrical includes a high fidelity N-Channel MOSFET block where Coss is included. The MOSFET Characteristics example m...

3 years ago | 0

Answered
Buck Converter phase node spike
In Simscape Electrical it is possible to do this using the N-Channel MOSFET block.

3 years ago | 0

Answered
Is there any readily available silicon carbide MOSFET switches in higher version of MATLAB simulink? Please help..
Simscape Electrical includes both high fidelity and low fidelity models that can be parameterized such that to simulate a SiC MO...

3 years ago | 0

Answered
Why am i not able to connect the ideal switch block to the voltage source and the controlled voltage sources.
I suspect different technologies are being used. Best to use only one technology. Without a sample model is difficult to underst...

3 years ago | 0

Answered
HOW MULTIPORT SWITCH WILL WORK????
Best to start with the documenation of Multiport Switch. The first input is the input which will control the active strategy. Th...

3 years ago | 0

Answered
Working of multiport switch
Best to start with the documenation of Multiport Switch. The first input is the input which will control the active strategy. Th...

3 years ago | 0

Answered
dimention error in matlab simulink
The Two-Quadrant DC/DC Converter needs two gate signals, one for high side switching device and one for low side switching devic...

3 years ago | 0

Answered
How to decide the sampling time in powegui block in discrete mode?
We choose the sample time depending on the system dynamics, check the Nyquist–Shannon sampling theorem. The sample time must be ...

3 years ago | 0

Answered
Iam new to MATLAB and Iam trying to connect a dc machine across a boost converter output.I changed the preset model parameter value to No. Then what will the voltage and power rating of the machine?
It depends on machine parameters that need to be provided in the Parameters tab.

3 years ago | 0

Answered
Single-Phase, 240 Vrms, 3500 W Transformerless Grid-Connected PV Array
That's a Clarke to Park Angle Transform. The measured current is the alpha-component and the beta-component is obtained by delay...

3 years ago | 0

Answered
How can I create an AC current source in which I can change the phase of source during the simulation?
If using Simscape Electrical there are Controlled Current Source (available in Simscape Foundation Library) and Controlled Curre...

3 years ago | 0

Answered
How to produce an average model from multiple other models.
Sum the outputs of the eight models and divide at number of signals (8 in your case). For example if the 8 signals are y1,...,y8...

3 years ago | 0

Answered
Fuel cell problem
Might be a problem with the control algorithm. Without a model is difficult to tell.

3 years ago | 0

Answered
initializ
https://mathworks.com/matlabcentral/answers/6200-tutorial-how-to-ask-a-question-on-answers-and-get-a-fast-answer

3 years ago | 0

Answered
wound rotor
Simscape Electrical includes both Squirrel Cage and Wound Rotor induction machines. Depending what the application is one or ano...

3 years ago | 0