Krishna Akella
Last seen: 5 months ago
MathWorks
41 total contributions since 2018All comments and opinions expressed here are mine alone and do not necessarily reflect those of my employers, past or present.
Krishna Akella's Badges
Contribute at least one answer each month for 6 consecutive months
Awarded to Krishna Akella on 09 Aug 2019
3 of your answers have been accepted
Awarded to Krishna Akella on 13 Dec 2018
Answer 10 questions that were unanswered for more than 30 days
Awarded to Krishna Akella on 10 Dec 2018
Provide your first answer ever to someone else's question
Awarded to Krishna Akella on 04 Dec 2018
Answered
SimEvents: Which entity type should event actions be assigned to? Invoker type or target type?
Hi Kar, The testEntry method is invoked before an entity enters a storage. This method allows to either accept or refuse an ent...
SimEvents: Which entity type should event actions be assigned to? Invoker type or target type?
Hi Kar, The testEntry method is invoked before an entity enters a storage. This method allows to either accept or refuse an ent...
1 year ago | 0
| accepted
Answered
Forward and Inverse Kinematics for robot
Hi Mohsina, I don't know the answer to your question but I looked at your model and I have a few observations. In your model I ...
Forward and Inverse Kinematics for robot
Hi Mohsina, I don't know the answer to your question but I looked at your model and I have a few observations. In your model I ...
1 year ago | 0
Answered
I am working on queueing using Simulink Sim Events, and I need help on adding an attribute to the events.
That sounds strange. The service completion action must be called when the server is finished serving an entity. There should b...
I am working on queueing using Simulink Sim Events, and I need help on adding an attribute to the events.
That sounds strange. The service completion action must be called when the server is finished serving an entity. There should b...
1 year ago | 0
Answered
How to create bus object within MATLAB discrete-event system, without having to load it in workspace?
Hi Kar, Are you looking for something like this? https://www.mathworks.com/help/simulink/ug/create-bus-objects-programmaticall...
How to create bus object within MATLAB discrete-event system, without having to load it in workspace?
Hi Kar, Are you looking for something like this? https://www.mathworks.com/help/simulink/ug/create-bus-objects-programmaticall...
1 year ago | 0
| accepted
Answered
Simevents: change the server capacity during simulation
Hi Kar, You are correct, Entity Server does not allow for changing the capacity at run-time. Resource Pool block allows changin...
Simevents: change the server capacity during simulation
Hi Kar, You are correct, Entity Server does not allow for changing the capacity at run-time. Resource Pool block allows changin...
1 year ago | 0
| accepted
Answered
Is there more documentation or examples on SimEvents observer?
Hi Kar, There are a couple of examples that illustrate the use of SimEvents observer. If you are using R2017b or later, there i...
Is there more documentation or examples on SimEvents observer?
Hi Kar, There are a couple of examples that illustrate the use of SimEvents observer. If you are using R2017b or later, there i...
1 year ago | 0
| accepted
Answered
Simevents discrete-event system documentation does not include some of variable-input syntaxes
Hi Kar, Unfortunately, to my knowledge, there isn't an easy way to infer the optional arguments. However, the way I infer the o...
Simevents discrete-event system documentation does not include some of variable-input syntaxes
Hi Kar, Unfortunately, to my knowledge, there isn't an easy way to infer the optional arguments. However, the way I infer the o...
1 year ago | 0
| accepted
Answered
I am working on queueing using Simulink Sim Events, and I need help on adding an attribute to the events.
Hi Biplav, Have you tried using SimEvents blocks for this? With simEvents you can use an 'Entity Generator' block and a 'Entity...
I am working on queueing using Simulink Sim Events, and I need help on adding an attribute to the events.
Hi Biplav, Have you tried using SimEvents blocks for this? With simEvents you can use an 'Entity Generator' block and a 'Entity...
1 year ago | 1
| accepted
Answered
SimEvents: Is it possible to generate an event-based entity with specific attribute values defined in the caller block's event action?
Hi Kar, Unfortunately, the entity generator's 'Generate' event action cannot use the values from the generation triggering enti...
SimEvents: Is it possible to generate an event-based entity with specific attribute values defined in the caller block's event action?
Hi Kar, Unfortunately, the entity generator's 'Generate' event action cannot use the values from the generation triggering enti...
1 year ago | 0
| accepted
Answered
On Off switch simulink
Hi VM, If I understand correctly, you are trying to model a machine going on a break for scheduled maintenance or some thing li...
On Off switch simulink
Hi VM, If I understand correctly, you are trying to model a machine going on a break for scheduled maintenance or some thing li...
1 year ago | 0
Answered
Conveyor Modelling - material handling
Hi Michael, That's a very interesting problem! You want to model "continous" material instead of lumped material, flowing on a ...
Conveyor Modelling - material handling
Hi Michael, That's a very interesting problem! You want to model "continous" material instead of lumped material, flowing on a ...
1 year ago | 0
Answered
How can I trigger an event in a Discrete-Event Chart based on the continous signal value?
Hi Nemanja, Have you tried using 'Message Send' and 'Message Receive' blocks? These blocks can be used to interface continuous ...
How can I trigger an event in a Discrete-Event Chart based on the continous signal value?
Hi Nemanja, Have you tried using 'Message Send' and 'Message Receive' blocks? These blocks can be used to interface continuous ...
1 year ago | 0
| accepted
Answered
Resource acquire block programmatic use
Hi Marco, To know the BlockType of any block, add the block to a model and select it. Then in MATLAB window, type the following...
Resource acquire block programmatic use
Hi Marco, To know the BlockType of any block, add the block to a model and select it. Then in MATLAB window, type the following...
1 year ago | 1
| accepted
Answered
Non-constant Batch Size
Hi Alex, In an entity generator you can set the 'Time source' to be 'MATLAB action' and then manipulate the output value 'dt' (...
Non-constant Batch Size
Hi Alex, In an entity generator you can set the 'Time source' to be 'MATLAB action' and then manipulate the output value 'dt' (...
1 year ago | 0
Answered
I need an entity gate that I can open and close based on an entity attribute.
Hi Andrew, The easiest way to do this is to use the 'Simulink Function' block and call the Simulink function from an event acti...
I need an entity gate that I can open and close based on an entity attribute.
Hi Andrew, The easiest way to do this is to use the 'Simulink Function' block and call the Simulink function from an event acti...
1 year ago | 0
| accepted
Answered
how to set up a entity gate to open and close based on situations encountered?
Hi Rita, I assume 'A', 'B' and 'C' are SimEvents blocks. In which case, you can use the statistics signals from 'A', 'B' and 'C...
how to set up a entity gate to open and close based on situations encountered?
Hi Rita, I assume 'A', 'B' and 'C' are SimEvents blocks. In which case, you can use the statistics signals from 'A', 'B' and 'C...
1 year ago | 0
Answered
SimEvents and Exporting Complete Event Information
Hi Noel, Sure, you can. Since its event data, I assume you want to export the information as a timeseries. You can use the simu...
SimEvents and Exporting Complete Event Information
Hi Noel, Sure, you can. Since its event data, I assume you want to export the information as a timeseries. You can use the simu...
1 year ago | 1
| accepted
Answered
simEvents cache model and simulation
Hi Luis, There is no example that I know of which simulates the behavior of an MMU. I think using SimEvents in conjunction with...
simEvents cache model and simulation
Hi Luis, There is no example that I know of which simulates the behavior of an MMU. I think using SimEvents in conjunction with...
1 year ago | 0
| accepted
Answered
How can I pass in an rng(seed) into a call to sim(...), as below (SimEvents model):
Hi Elliot, As an alternative to adding coder.extrinsic('rand') to all the blocks, one can also setup a global simulink function...
How can I pass in an rng(seed) into a call to sim(...), as below (SimEvents model):
Hi Elliot, As an alternative to adding coder.extrinsic('rand') to all the blocks, one can also setup a global simulink function...
1 year ago | 0
Answered
How can I pass in an rng(seed) into a call to sim(...), as below (SimEvents model):
Hi Elliot, You are correct! Your solution works correctly! I have identified what was happening and here is what is happening:...
How can I pass in an rng(seed) into a call to sim(...), as below (SimEvents model):
Hi Elliot, You are correct! Your solution works correctly! I have identified what was happening and here is what is happening:...
1 year ago | 0
Answered
Set multiple attributes in entity generator block
Hi Marco, The different attribute names and their initial values are delimited by the pipe symbol. For example if you want to a...
Set multiple attributes in entity generator block
Hi Marco, The different attribute names and their initial values are delimited by the pipe symbol. For example if you want to a...
1 year ago | 0
| accepted
Answered
Building Simevents model with Matlab code. Setting the output switch 'number of ports' parameter.
Hi Marco, If you are trying to set the 'Number of output ports', have you tried the following instead: add_block('built-in/ent...
Building Simevents model with Matlab code. Setting the output switch 'number of ports' parameter.
Hi Marco, If you are trying to set the 'Number of output ports', have you tried the following instead: add_block('built-in/ent...
1 year ago | 0
| accepted
Answered
How can I pass in an rng(seed) into a call to sim(...), as below (SimEvents model):
Hi Elliot, I am glad you were able to solve your problem. I am trying to understand your solution and I tried adding the code ...
How can I pass in an rng(seed) into a call to sim(...), as below (SimEvents model):
Hi Elliot, I am glad you were able to solve your problem. I am trying to understand your solution and I tried adding the code ...
1 year ago | 0
Answered
How can I pass in an rng(seed) into a call to sim(...), as below (SimEvents model):
Hi Elliot, It seems like the random number generator is unique to each block and the default seed is 0. Setting rng(5) on the c...
How can I pass in an rng(seed) into a call to sim(...), as below (SimEvents model):
Hi Elliot, It seems like the random number generator is unique to each block and the default seed is 0. Setting rng(5) on the c...
1 year ago | 0
Answered
Can A Multicast Sender send to a tag which is dynamically determined from an attribute in the entity which it is sending?
Hi Elliot, I think I don't understand your question well. I have attached a model based on what I understood. Where entity.type...
Can A Multicast Sender send to a tag which is dynamically determined from an attribute in the entity which it is sending?
Hi Elliot, I think I don't understand your question well. I have attached a model based on what I understood. Where entity.type...
1 year ago | 0
Answered
Entity generation in SimEvents
Hi Summyia, A persistent variable persists its value between function calls. 'isempty(SEQ)' returns 1 if SEQ is an empty array ...
Entity generation in SimEvents
Hi Summyia, A persistent variable persists its value between function calls. 'isempty(SEQ)' returns 1 if SEQ is an empty array ...
1 year ago | 0
Answered
Stochastic SimEvents simulation for servers
Hi Etienne, Simevents ships with many examples. You can find them by running the command doc at your MATLAB prompt. Then select...
Stochastic SimEvents simulation for servers
Hi Etienne, Simevents ships with many examples. You can find them by running the command doc at your MATLAB prompt. Then select...
1 year ago | 0
Answered
What does this code mean?
Hi Navya, In the Entity Generator, Entity Generation tab, dt is the amount of time the generator has to wait before it generate...
What does this code mean?
Hi Navya, In the Entity Generator, Entity Generation tab, dt is the amount of time the generator has to wait before it generate...
1 year ago | 0
Answered
How Replicate module can generate variable number of replications using a signal in SimEvents?
Hi Summyia, Have you tried something along the following lines: Call a simulink function from an event action, just before the...
How Replicate module can generate variable number of replications using a signal in SimEvents?
Hi Summyia, Have you tried something along the following lines: Call a simulink function from an event action, just before the...
1 year ago | 0
Answered
SimEvents Conveyor belt with entities at different speeds
Hi Etienne, Thanks for your question! The source code for the Conveyor block has been made available for anyone to read/modify ...
SimEvents Conveyor belt with entities at different speeds
Hi Etienne, Thanks for your question! The source code for the Conveyor block has been made available for anyone to read/modify ...
1 year ago | 0
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
Select web siteYou can also select a web site from the following list:
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)