Control PR2 Arm Movements Using ROS Actions and Inverse Kinematics
Robotics System Toolbox™ supports workflows related to articulated robots. You can send commands to robotic manipulators in MATLAB®. Joint position commands are sent via a ROS action client over a ROS network. You can also calculate joint positions for a desired end-effect position. A rigid body tree defines the robot geometry and joint constraints, which is used with inverse kinematics to provide the robot with joint positions. You can then send these joint positions as a trajectory to command the robot to move.
Recorded: 8 Mar 2017
You can also select a web site from the following list
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.