comm.GeneralQAMTCMDemodulator

Demodulate and decode trellis-coded general quadrature amplitude modulated signal

Description

The comm.GeneralQAMTCMDemodulator System object™ object uses the Viterbi algorithm to decode a signal modulated by the trellis-coded modulation (TCM) technique with a general quadrature amplitude modulation (QAM) signal constellation.

To demodulate and decode the trellis-coded general quadrature amplitude modulated signal:

1. Create the comm.GeneralQAMTCMDemodulator object and set its properties.

2. Call the object with arguments, as if it were a function.

To learn more about how System objects work, see What Are System Objects?

Creation

Syntax

gqamtcmDemod = comm.GeneralQAMTCMDemodulator

gqamtcmDemod = comm.GeneralQAMTCMDemodulator(trellis)

gqamtcmDemod = comm.GeneralQAMTCMDemodulator(___,Name=Value)

Description

gqamtcmDemod = comm.GeneralQAMTCMDemodulator creates a general QAM TCM demodulator System object, gqamtcmDemod. This object demodulates and decodes a trellis-coded general quadrature amplitude modulated signal.

gqamtcmDemod = comm.GeneralQAMTCMDemodulator(trellis) additionally sets the TrellisStructure property to trellis.

gqamtcmDemod = comm.GeneralQAMTCMDemodulator(___,Name=Value) creates a general QAM TCM demodulator System object using any of the previous syntaxes and sets properties using one or more name-value arguments. For example, comm.GeneralQAMTCMDemodulator(TerminationMethod="Continuous") sets the termination method of the encoded frame to "Continuous".

Properties

Unless otherwise indicated, properties are nontunable, which means you cannot change their values after calling the object. Objects lock when you call them, and the release function unlocks them.

If a property is tunable, you can change its value at any time.

For more information on changing property values, see System Design in MATLAB Using System Objects.

TrellisStructure — Trellis structure of convolutional code

poly2trellis([1 3], [1 0 0; 0 5 2]) (default) | structure

Trellis structure of the convolutional code, specified as a MATLAB^® structure that contains the trellis description of the convolutional code. Use the istrellis function to check whether a trellis structure is valid.

The trellis structure contains these fields.

numInputSymbols — Number of symbols input to encoder

2^K

Number of symbols input to the encoder, specified as an integer equal to 2^K, where K is the number of input bit streams.

numOutputSymbols — Number of symbols output from encoder

2^N

Number of symbols output from the encoder, specified as an integer equal to 2^N, where N is the number of output bit streams.

numStates — Number of states in encoder

power of 2

Number of states in the encoder, specified as a power of 2.

nextStates — Next states

matrix of integers

Next states for all combinations of current states and current inputs, specified as a matrix of integers. The matrix size must be numStates by 2^K.

outputs — Outputs

matrix of octal numbers

Outputs for all combinations of current states and current inputs, specified as a matrix of octal numbers. The matrix size must be numStates by 2^K.

Data Types: struct

TerminationMethod — Termination method of encoded frame

"Continuous" (default) | "Truncated" | "Terminated"

Termination method of the encoded frame, specified as one of these options.

• "Continuous" — The object saves the internal state metric at the end of each frame. The next frame uses the same state metric. The object treats each traceback path independently. If the input signal contains only one symbol, use "Continuous" mode.

• "Truncated" — The object treats each input vector independently. The traceback path starts at the state with the best metric and always ends in the all-zeros state.

• "Terminated" — The object treats each input vector independently, and the traceback path always starts and ends in the all-zeros state.

TracebackDepth — Traceback depth for Viterbi decoder

21 (default) | positive integer

Traceback depth for the Viterbi decoder, specified as a positive integer. The traceback depth influences the decoding accuracy and delay. The decoding delay is the number of zero symbols that precede the first decoded symbol in the output.

When you set the TerminationMethod property to "Continuous", the decoding delay consists of TracebackDepth zero symbols or (TracebackDepth×K) zero bits for a rate K/N convolutional code.

When you set the TerminationMethod property to "Truncated" or "Terminated", no output delay occurs and the traceback depth must be less than or equal to the number of symbols in each input vector.

Data Types: double

ResetInputPort — Demodulator reset input

false or 0 (default) | true or 1

Demodulator reset input, specified as a logical 0 (false) or 1 (true). Set this property to true to call the object with an additional input. For nonzero reset input values, the object resets the state metrics and traceback memory of the demodulator to zero.

Dependencies

To enable this property, set the TerminationMethod property to "Continuous".

Constellation — Signal constellation

exp(2×π×j×[0 4 2 6 1 5 3 7]/8) (default) | vector

Signal constellation, specified as a complex vector. This vector lists the points in the signal constellation used to map the result of the convolutional encoder. The constellation must be specified in set-partitioned order. The length of the constellation vector must equal the number of possible input symbols to the convolutional encoder of the general QAM TCM modulator object. This value corresponds to 2^N for a rate K/N convolutional code. The default corresponds to a set-partitioned order for the points of an 8-PSK signal constellation.

Data Types: single | double
Complex Number Support: Yes

OutputDataType — Data type of output

"double" (default) | "logical"

Data type of the output, specified as "logical" or "double".

Usage

Syntax

Y = gqamtcmDemod(X)

Y = gqamtcmDemod(X,R)

Description

Y = gqamtcmDemod(X) demodulates the general quadrature amplitude modulated data, X, and uses the Viterbi algorithm to decode the resulting demodulated bitstream encoded with a convolutional code.

Y = gqamtcmDemod(X,R) resets the decoder to the all-zeros state when you input a reset signal, R, that is nonzero. This syntax applies when you set the value of the ResetInputPort property to true.

Input Arguments

X — Input data

column vector

Input data, specified as a column vector.

Data Types: double | logical
Complex Number Support: Yes

R — Reset signal

false or 0 (default) | true or 1 | numeric scalar

Reset signal, specified as a logical 0 (false), 1 (true), or numeric scalar.

Dependencies

To use this argument, set the ResetInputPort property to true.

Data Types: double | logical

Output Arguments

Y — Output data

column vector

Output data, specified as a column vector. When the convolutional encoder represents a rate K/N code, the length of the output vector is K×L, where L is the length of the input vector, X. The data type of the output data depends on the OutputDataType property.

Object Functions

To use an object function, specify the System object as the first input argument. For example, to release system resources of a System object named obj, use this syntax:

release(obj)

Common to All System Objects

step	Run System object algorithm
release	Release resources and allow changes to System object property values and input characteristics
reset	Reset internal states of System object

Examples

Modulate and Demodulate Data Using QAM TCM

Modulate and demodulate noisy data using QAM TCM modulation with an arbitrary four point constellation. Estimate the resultant BER.

Define a trellis structure with two input symbols and four output symbols using a [171 133] generator polynomial. Define an arbitrary four-point constellation.

qamTrellis = poly2trellis(7,[171 133]);
refConst = exp(pi*1i*[1 2 3 6]/4);

Create a QAM TCM modulator and demodulator System object™ pair using qamTrellis and refConst.

qamtcmod = comm.GeneralQAMTCMModulator( ...
    qamTrellis, ...
    Constellation=refConst);
qamtcdemod = comm.GeneralQAMTCMDemodulator( ...
    qamTrellis, ...
    Constellation=refConst);

Create an error rate calculator with delay (in bits) equal to the product of TracebackDepth and the number of bits per symbol.

errorrate = comm.ErrorRate( ...
    ReceiveDelay=qamtcdemod.TracebackDepth * ...
    log2(qamTrellis.numInputSymbols));

Generate random binary data and apply QAM TCM modulation. Pass the signal through an AWGN channel and demodulate the signal. Collect the error statistics.

for counter = 1:10
    % Generate binary data
    data = randi([0 1],500,1);
    % Modulate
    modSignal = qamtcmod(data);
    % Pass through an AWGN channel
    noisySignal = awgn(modSignal,4);
    % Demodulate
    receivedData = qamtcdemod(noisySignal);
    % Calculate the error statistics
    errorStats = errorrate(data,receivedData);
end

Display the BER and the number of bit errors.

fprintf("Error rate = %5.2e\nNumber of errors = %d\n", ...
    errorStats(1), errorStats(2))

Error rate = 9.84e-03
Number of errors = 49

Extended Capabilities

C/C++ Code Generation

Generate C and C++ code using MATLAB® Coder™.

Usage notes and limitations:

See System Objects in MATLAB Code Generation (MATLAB Coder).

Version History

Introduced in R2012a