Circuit Envelope Simulation in MATLAB

Circuit envelope simulation of RF system at the MATLAB command line

The circuit envelope simulation technique enables you to perform time-varying harmonic balance analysis of an RF system around multiple carrier frequencies. You can use this technique to simulate RF systems operating with narrowband signals.

Use the rfsystem System object™ and its associated object functions to perform circuit envelope simulation at the MATLAB command line.

Objects

rfsystem Generate RF Blockset model and perform circuit envelope or idealized baseband simulation (Since R2021a)

Functions

`open_system`	Open RF Blockset model created using `rfsystem` (Since R2021a)
`save_system`	Save RF Blockset model created using `rfsystem` (Since R2021a)
`close_system`	Close RF Blockset model window created using `rfsystem` (Since R2021a)
`hide_system`	Hide RF Blockset model window created using `rfsystem` (Since R2021a)
`load_system`	Load RF Blockset model to memory (Since R2022a)

Topics

Circuit Envelope Simulation at MATLAB Command Line
Perform circuit envelope simulation at the MATLAB command line.

Related Information

Enabling RF Circuit Envelope Simulation in MATLAB

Featured Examples

RF Receiver Modeling for LTE Reception

Model and test an LTE RF receiver.

Open Script

Massive MIMO Hybrid Beamforming with RF Impairments

Employ hybrid beamforming at the transmit end of a massive MIMO communication system.

Open Script

RF Impairments for 5G NR Downlink Waveforms

Model RF impairments for 5F NR downlink waveforms and then compute and visualize EVM of this waveform.

Open Script

Power Amplifier and DPD Modeling for Dynamic EVM Measurement

Extract a PA model using measured data, verify the quality of the fitting, and simulate the PA model with and without DPD.

Open Live Script