Transformers

Inductors, tap changing transformer, two- and three-winding transformers

Increase or decrease AC voltages using transformers. Regulate voltage by varying the turns ratio using a tap-changing transformer.

Simscape Blocks

Earthing Transformer	Three-phase earthing transformer in zigzag configuration
Mutual Inductor	Mutual inductor model with nominal inductance optional tolerances for each winding, operating limits and faults
Nonlinear Transformer	Transformer with nonideal core
Tap-Changing Transformer	Single-phase tap-changing transformer
Three-Winding Mutual Inductor	Three coupled inductors
Three-Winding Nonlinear Transformer	Single-phase nonlinear three-winding transformer
Three-Winding Transformer (Three-Phase)	Three-phase linear nonideal wye- and delta-configurable three-winding transformer with saturation capability
Two-Winding Transformer (Three-Phase)	Three-phase linear nonideal wye- and delta-configurable two-winding transformer with saturation capability
Zigzag-Delta-Wye Transformer	Linear, non-ideal zigzag-delta-wye transformer with three-limb core with saturation capability

Featured Examples

Tap-Changing Transformer for Automatic Voltage Regulation

Use a single-phase tap-changing transformer to control the voltage across an RLC load. The system contains an AC voltage source that generates a 60 Hz sine wave (located on the left-hand side of the circuit). The root-mean-square value for the voltage generated by this source is 120 V (reference voltage).

Open Model