# CompactClassificationNaiveBayes

Compact naive Bayes classifier for multiclass classification

## Description

`CompactClassificationNaiveBayes`

is a compact version of the
naive Bayes classifier. The compact classifier does not include the data used for
training the naive Bayes classifier. Therefore, you cannot perform some tasks, such as
cross-validation, using the compact classifier. Use a compact naive Bayes classifier for
tasks such as predicting the labels of the data.

## Creation

Create a `CompactClassificationNaiveBayes`

model from a full, trained
`ClassificationNaiveBayes`

classifier by
using `compact`

.

## Properties

### Predictor Properties

`PredictorNames`

— Predictor names

cell array of character vectors

This property is read-only.

Predictor names, specified as a cell array of character vectors. The order of the
elements in `PredictorNames`

corresponds to the order in which the
predictor names appear in the training data `X`

.

`ExpandedPredictorNames`

— Expanded predictor names

cell array of character vectors

This property is read-only.

Expanded predictor names, specified as a cell array of character vectors.

If the model uses dummy variable encoding for categorical variables, then
`ExpandedPredictorNames`

includes the names that describe the
expanded variables. Otherwise, `ExpandedPredictorNames`

is the same as
`PredictorNames`

.

`CategoricalPredictors`

— Categorical predictor indices

vector of positive integers | `[]`

This property is read-only.

Categorical predictor
indices, specified as a vector of positive integers. `CategoricalPredictors`

contains index values indicating that the corresponding predictors are categorical. The index
values are between 1 and `p`

, where `p`

is the number of
predictors used to train the model. If none of the predictors are categorical, then this
property is empty (`[]`

).

**Data Types: **`single`

| `double`

`CategoricalLevels`

— Multivariate multinomial levels

cell array

This property is read-only.

Multivariate multinomial levels, specified as a cell array. The length of
`CategoricalLevels`

is equal to the number of
predictors (`size(X,2)`

).

The cells of `CategoricalLevels`

correspond to predictors
that you specify as `'mvmn'`

during training, that is, they
have a multivariate multinomial distribution. Cells that do not correspond
to a multivariate multinomial distribution are empty
(`[]`

).

If predictor *j* is multivariate multinomial, then
`CategoricalLevels{`

*j*`}`

is a list of all distinct values of predictor *j* in the
sample. `NaN`

s are removed from
`unique(X(:,j))`

.

### Predictor Distribution Properties

`DistributionNames`

— Predictor distributions

`'normal'`

(default) | `'kernel'`

| `'mn'`

| `'mvmn'`

| cell array of character vectors

This property is read-only.

Predictor distributions, specified as a character vector or cell array of
character vectors. `fitcnb`

uses the predictor
distributions to model the predictors. This table lists the available
distributions.

Value | Description |
---|---|

`'kernel'` | Kernel smoothing density estimate |

`'mn'` | Multinomial distribution. If you specify
`mn` , then all features are
components of a multinomial distribution.
Therefore, you cannot include
`'mn'` as an element of a string
array or a cell array of character vectors. For
details, see Estimated Probability for Multinomial Distribution. |

`'mvmn'` | Multivariate multinomial distribution. For details, see Estimated Probability for Multivariate Multinomial Distribution. |

`'normal'` | Normal (Gaussian) distribution |

If `DistributionNames`

is a 1-by-*P* cell
array of character vectors, then `fitcnb`

models the feature
*j* using the distribution in element
*j* of the cell array.

**Example: **`'mn'`

**Example: **`{'kernel','normal','kernel'}`

**Data Types: **`char`

| `string`

| `cell`

`DistributionParameters`

— Distribution parameter estimates

cell array

This property is read-only.

Distribution parameter estimates, specified as a cell array.
`DistributionParameters`

is a
*K*-by-*D* cell array, where cell
(*k*,*d*) contains the distribution parameter
estimates for instances of predictor *d* in class *k*.
The order of the rows corresponds to the order of the classes in the property
`ClassNames`

, and the order of the predictors corresponds to the
order of the columns of `X`

.

If class * k* has no observations for predictor

*, then the*

`j`

`Distribution{``k`

,`j`

}

is empty (`[]`

).The elements of `DistributionParameters`

depend on the distributions
of the predictors. This table describes the values in
`DistributionParameters{`

.* k*,

*}*

`j`

Distribution of Predictor
j | Value of Cell Array for Predictor
`j` and Class `k` |
---|---|

`kernel` | A `KernelDistribution` model.
Display properties using cell indexing and dot notation. For
example, to display the estimated bandwidth of the kernel density
for predictor 2 in the third class, use
`Mdl.DistributionParameters{3,2}.Bandwidth` . |

`mn` | A scalar representing the probability that token
j appears in class k. For
details, see Estimated Probability for Multinomial Distribution. |

`mvmn` | A numeric vector containing the probabilities for each possible
level of predictor j in class
k. The software orders the probabilities by
the sorted order of all unique levels of predictor
j (stored in the property
`CategoricalLevels` ). For more details, see
Estimated Probability for Multivariate Multinomial Distribution. |

`normal` | A 2-by-1 numeric vector. The first element is the sample mean and the second element is the sample standard deviation. For more details, see Normal Distribution Estimators |

`Kernel`

— Kernel smoother type

`'normal'`

(default) | `'box'`

| cell array | ...

This property is read-only.

Kernel smoother type, specified as the name of a kernel or a cell array of kernel
names. The length of `Kernel`

is equal to the number of predictors
(`size(X,2)`

).
`Kernel{`

*j*`}`

corresponds to
predictor *j* and contains a character vector describing the type of
kernel smoother. If a cell is empty (`[]`

), then `fitcnb`

did not fit a kernel distribution to the corresponding
predictor.

This table describes the supported kernel smoother types.
*I*{*u*} denotes the indicator function.

Value | Kernel | Formula |
---|---|---|

`'box'` | Box (uniform) |
$$f(x)=0.5I\left\{\left|x\right|\le 1\right\}$$ |

`'epanechnikov'` | Epanechnikov |
$$f(x)=0.75\left(1-{x}^{2}\right)I\left\{\left|x\right|\le 1\right\}$$ |

`'normal'` | Gaussian |
$$f(x)=\frac{1}{\sqrt{2\pi}}\mathrm{exp}\left(-0.5{x}^{2}\right)$$ |

`'triangle'` | Triangular |
$$f(x)=\left(1-\left|x\right|\right)I\left\{\left|x\right|\le 1\right\}$$ |

**Example: **`'box'`

**Example: **`{'epanechnikov','normal'}`

**Data Types: **`char`

| `string`

| `cell`

`Mu`

— Predictor means

numeric vector | `[]`

*Since R2023b*

This property is read-only.

Predictor means, specified as a numeric vector. If you specify
`Standardize`

as `1`

or `true`

when you train the naive Bayes classifier using `fitcnb`

, then the
length of the `Mu`

vector is equal to the number of predictors. The
vector contains `0`

values for predictors with nonkernel distributions,
such as categorical predictors (see `DistributionNames`

).

If you set `Standardize`

to `0`

or
`false`

when you train the naive Bayes classifier using
`fitcnb`

, then the `Mu`

value is an empty
vector (`[]`

).

**Data Types: **`double`

`Sigma`

— Predictor standard deviations

numeric vector | `[]`

*Since R2023b*

This property is read-only.

Predictor standard deviations, specified as a numeric vector. If you specify
`Standardize`

as `1`

or `true`

when you train the naive Bayes classifier using `fitcnb`

, then the
length of the `Sigma`

vector is equal to the number of predictors.
The vector contains `1`

values for predictors with nonkernel
distributions, such as categorical predictors (see
`DistributionNames`

).

If you set `Standardize`

to `0`

or
`false`

when you train the naive Bayes classifier using
`fitcnb`

, then the `Sigma`

value is an empty
vector (`[]`

).

**Data Types: **`double`

`Support`

— Kernel smoother density support

cell array

This property is read-only.

Kernel smoother density support, specified as a cell array. The length of
`Support`

is equal to the number of predictors
(`size(X,2)`

). The cells represent the regions to which
`fitcnb`

applies the kernel density. If a cell is empty
(`[]`

), then `fitcnb`

did not fit a kernel distribution to the corresponding
predictor.

This table describes the supported options.

Value | Description |
---|---|

1-by-2 numeric row vector | The density support applies to the specified bounds, for example
`[L,U]` , where `L` and
`U` are the finite lower and upper bounds,
respectively. |

`'positive'` | The density support applies to all positive real values. |

`'unbounded'` | The density support applies to all real values. |

`Width`

— Kernel smoother window width

numeric matrix

This property is read-only.

Kernel smoother window width, specified as a numeric matrix.
`Width`

is a
*K*-by-*P* matrix, where
*K* is the number of classes in the data, and
*P* is the number of predictors
(`size(X,2)`

).

`Width(`

is the kernel smoother window width for the kernel smoothing density of
predictor * k*,

*)*

`j`

*within class*

`j`

*.*

`k`

`NaN`

s in column
*indicate that*

`j`

`fitcnb`

did not fit
predictor *using a kernel density.*

`j`

### Response Properties

`ClassNames`

— Unique class names

categorical array | character array | logical vector | numeric vector | cell array of character vectors

This property is read-only.

Unique class names used in the training model, specified as a categorical or character array, logical or numeric vector, or cell array of character vectors.

`ClassNames`

has the same data type as `Y`

, and
has *K* elements (or rows) for character arrays. (The software treats string arrays as cell arrays of character
vectors.)

**Data Types: **`categorical`

| `char`

| `string`

| `logical`

| `double`

| `cell`

`ResponseName`

— Response variable name

character vector

This property is read-only.

Response variable name, specified as a character vector.

**Data Types: **`char`

| `string`

### Training Properties

`Prior`

— Prior probabilities

numeric vector

Prior probabilities, specified as a numeric vector. The order of the elements in
`Prior`

corresponds to the elements of
`Mdl.ClassNames`

.

`fitcnb`

normalizes the prior probabilities
you set using the `'Prior'`

name-value pair argument, so that
`sum(Prior)`

= `1`

.

The value of `Prior`

does not affect the best-fitting model.
Therefore, you can reset `Prior`

after training `Mdl`

using dot notation.

**Example: **`Mdl.Prior = [0.2 0.8]`

**Data Types: **`double`

| `single`

### Classifier Properties

`Cost`

— Misclassification cost

square matrix

Misclassification cost, specified as a numeric square matrix, where
`Cost(i,j)`

is the cost of classifying a point into class
`j`

if its true class is `i`

. The rows correspond
to the true class and the columns correspond to the predicted class. The order of the
rows and columns of `Cost`

corresponds to the order of the classes in
`ClassNames`

.

The misclassification cost matrix must have zeros on the diagonal.

The value of `Cost`

does not influence training. You can reset
`Cost`

after training `Mdl`

using dot
notation.

**Example: **`Mdl.Cost = [0 0.5 ; 1 0]`

**Data Types: **`double`

| `single`

`ScoreTransform`

— Classification score transformation

`'none'`

(default) | `'doublelogit'`

| `'invlogit'`

| `'ismax'`

| `'logit'`

| function handle | ...

Classification score transformation, specified as a character vector or function handle. This table summarizes the available character vectors.

Value | Description |
---|---|

`"doublelogit"` | 1/(1 + e^{–2x}) |

`"invlogit"` | log(x / (1 – x)) |

`"ismax"` | Sets the score for the class with the largest score to 1, and sets the scores for all other classes to 0 |

`"logit"` | 1/(1 + e^{–x}) |

`"none"` or `"identity"` | x (no transformation) |

`"sign"` | –1 for x < 00 for x = 01 for x >
0 |

`"symmetric"` | 2x – 1 |

`"symmetricismax"` | Sets the score for the class with the largest score to 1, and sets the scores for all other classes to –1 |

`"symmetriclogit"` | 2/(1 + e^{–x})
– 1 |

For a MATLAB^{®} function or a function you define, use its function handle for the score
transformation. The function handle must accept a matrix (the original scores) and
return a matrix of the same size (the transformed scores).

**Example: **`Mdl.ScoreTransform = 'logit'`

**Data Types: **`char`

| `string`

| `function handle`

## Object Functions

`compareHoldout` | Compare accuracies of two classification models using new data |

`edge` | Classification edge for naive Bayes classifier |

`lime` | Local interpretable model-agnostic explanations (LIME) |

`logp` | Log unconditional probability density for naive Bayes classifier |

`loss` | Classification loss for naive Bayes classifier |

`margin` | Classification margins for naive Bayes classifier |

`partialDependence` | Compute partial dependence |

`plotPartialDependence` | Create partial dependence plot (PDP) and individual conditional expectation (ICE) plots |

`predict` | Classify observations using naive Bayes classifier |

`shapley` | Shapley values |

## Examples

### Reduce Size of Naive Bayes Classifier

Reduce the size of a full naive Bayes classifier by removing the training data. Full naive Bayes classifiers hold the training data. You can use a compact naive Bayes classifier to improve memory efficiency.

Load the `ionosphere`

data set. Remove the first two predictors for stability.

```
load ionosphere
X = X(:,3:end);
```

Train a naive Bayes classifier using the predictors `X`

and class labels `Y`

. A recommended practice is to specify the class names. `fitcnb`

assumes that each predictor is conditionally and normally distributed.

Mdl = fitcnb(X,Y,'ClassNames',{'b','g'})

Mdl = ClassificationNaiveBayes ResponseName: 'Y' CategoricalPredictors: [] ClassNames: {'b' 'g'} ScoreTransform: 'none' NumObservations: 351 DistributionNames: {1x32 cell} DistributionParameters: {2x32 cell}

`Mdl`

is a trained `ClassificationNaiveBayes`

classifier.

Reduce the size of the naive Bayes classifier.

CMdl = compact(Mdl)

CMdl = CompactClassificationNaiveBayes ResponseName: 'Y' CategoricalPredictors: [] ClassNames: {'b' 'g'} ScoreTransform: 'none' DistributionNames: {1x32 cell} DistributionParameters: {2x32 cell}

`CMdl`

is a trained `CompactClassificationNaiveBayes`

classifier.

Display the amount of memory used by each classifier.

whos('Mdl','CMdl')

Name Size Bytes Class Attributes CMdl 1x1 15229 classreg.learning.classif.CompactClassificationNaiveBayes Mdl 1x1 111359 ClassificationNaiveBayes

The full naive Bayes classifier (`Mdl`

) is more than seven times larger than the compact naive Bayes classifier (`CMdl`

).

To label new observations efficiently, you can remove `Mdl`

from the MATLAB® Workspace, and then pass `CMdl`

and new predictor values to `predict`

.

### Train and Cross-Validate Naive Bayes Classifier

Train and cross-validate a naive Bayes classifier. `fitcnb`

implements 10-fold cross-validation by default. Then, estimate the cross-validated classification error.

Load the `ionosphere`

data set. Remove the first two predictors for stability.

load ionosphere X = X(:,3:end); rng('default') % for reproducibility

Train and cross-validate a naive Bayes classifier using the predictors `X`

and class labels `Y`

. A recommended practice is to specify the class names. `fitcnb`

assumes that each predictor is conditionally and normally distributed.

CVMdl = fitcnb(X,Y,'ClassNames',{'b','g'},'CrossVal','on')

CVMdl = ClassificationPartitionedModel CrossValidatedModel: 'NaiveBayes' PredictorNames: {'x1' 'x2' 'x3' 'x4' 'x5' 'x6' 'x7' 'x8' 'x9' 'x10' 'x11' 'x12' 'x13' 'x14' 'x15' 'x16' 'x17' 'x18' 'x19' 'x20' 'x21' 'x22' 'x23' 'x24' 'x25' 'x26' 'x27' 'x28' 'x29' 'x30' 'x31' 'x32'} ResponseName: 'Y' NumObservations: 351 KFold: 10 Partition: [1x1 cvpartition] ClassNames: {'b' 'g'} ScoreTransform: 'none'

`CVMdl`

is a `ClassificationPartitionedModel`

cross-validated, naive Bayes classifier. Alternatively, you can cross-validate a trained `ClassificationNaiveBayes`

model by passing it to `crossval`

.

Display the first training fold of `CVMdl`

using dot notation.

CVMdl.Trained{1}

ans = CompactClassificationNaiveBayes ResponseName: 'Y' CategoricalPredictors: [] ClassNames: {'b' 'g'} ScoreTransform: 'none' DistributionNames: {1x32 cell} DistributionParameters: {2x32 cell}

Each fold is a `CompactClassificationNaiveBayes`

model trained on 90% of the data.

Full and compact naive Bayes models are not used for predicting on new data. Instead, use them to estimate the generalization error by passing `CVMdl`

to `kfoldLoss`

.

genError = kfoldLoss(CVMdl)

genError = 0.1852

On average, the generalization error is approximately 19%.

You can specify a different conditional distribution for the predictors, or tune the conditional distribution parameters to reduce the generalization error.

## More About

### Bag-of-Tokens Model

In the bag-of-tokens model, the value of predictor *j*
is the nonnegative number of occurrences of token *j* in the observation.
The number of categories (bins) in the multinomial model is the number of distinct tokens
(number of predictors).

### Naive Bayes

*Naive Bayes* is a classification
algorithm that applies density estimation to the data.

The algorithm leverages Bayes theorem, and (naively) assumes that the predictors are conditionally independent, given the class. Although the assumption is usually violated in practice, naive Bayes classifiers tend to yield posterior distributions that are robust to biased class density estimates, particularly where the posterior is 0.5 (the decision boundary) [1].

Naive Bayes classifiers assign observations to the most probable class (in other words, the
*maximum a posteriori* decision rule). Explicitly, the algorithm
takes these steps:

Estimate the densities of the predictors within each class.

Model posterior probabilities according to Bayes rule. That is, for all

*k*= 1,...,*K*,$$\widehat{P}\left(Y=k|{X}_{1},\mathrm{..},{X}_{P}\right)=\frac{\pi \left(Y=k\right){\displaystyle \prod _{j=1}^{P}P}\left({X}_{j}|Y=k\right)}{{\displaystyle \sum}_{k=1}^{K}\pi \left(Y=k\right){\displaystyle \prod _{j=1}^{P}P}\left({X}_{j}|Y=k\right)},$$

where:

*Y*is the random variable corresponding to the class index of an observation.*X*_{1},...,*X*are the random predictors of an observation._{P}$$\pi \left(Y=k\right)$$ is the prior probability that a class index is

*k*.

Classify an observation by estimating the posterior probability for each class, and then assign the observation to the class yielding the maximum posterior probability.

If the predictors compose a multinomial distribution, then the posterior probability$$\widehat{P}\left(Y=k|{X}_{1},\mathrm{..},{X}_{P}\right)\propto \pi \left(Y=k\right){P}_{mn}\left({X}_{1},\mathrm{...},{X}_{P}|Y=k\right),$$ where $${P}_{mn}\left({X}_{1},\mathrm{...},{X}_{P}|Y=k\right)$$ is the probability mass function of a multinomial distribution.

## Algorithms

### Normal Distribution Estimators

If predictor variable * j* has a conditional normal distribution (see the

`DistributionNames`

property), the software fits the distribution to the data by computing the class-specific weighted mean and the unbiased estimate of the weighted standard deviation. For each class *k*:

The weighted mean of predictor

*j*is$${\overline{x}}_{j|k}=\frac{{\displaystyle \sum _{\{i:{y}_{i}=k\}}{w}_{i}{x}_{ij}}}{{\displaystyle \sum _{\{i:{y}_{i}=k\}}{w}_{i}}},$$

where

*w*is the weight for observation_{i}*i*. The software normalizes weights within a class such that they sum to the prior probability for that class.The unbiased estimator of the weighted standard deviation of predictor

*j*is$${s}_{j|k}={\left[\frac{{\displaystyle \sum _{\{i:{y}_{i}=k\}}{w}_{i}{\left({x}_{ij}-{\overline{x}}_{j|k}\right)}^{2}}}{{z}_{1|k}-\frac{{z}_{2|k}}{{z}_{1|k}}}\right]}^{1/2},$$

where

*z*_{1|k}is the sum of the weights within class*k*and*z*_{2|k}is the sum of the squared weights within class*k*.

### Estimated Probability for Multinomial Distribution

If all predictor variables compose a conditional multinomial distribution (see the
`DistributionNames`

property), the software fits the distribution
using the Bag-of-Tokens Model. The software stores the probability
that token * j* appears in class

*in the property*

`k`

`DistributionParameters{``k`

,`j`

}

.
With additive smoothing [2], the estimated probability is$$P(\text{token}j|\text{class}k)=\frac{1+{c}_{j|k}}{P+{c}_{k}},$$

where:

$${c}_{j|k}={n}_{k}\frac{{\displaystyle \sum _{\{i:{y}_{i}=k\}}^{}{x}_{ij}}{w}_{i}^{}}{{\displaystyle \sum _{\{i:{y}_{i}=k\}}^{}{w}_{i}}},$$ which is the weighted number of occurrences of token

*j*in class*k*.*n*is the number of observations in class_{k}*k*.$${w}_{i}^{}$$ is the weight for observation

*i*. The software normalizes weights within a class so that they sum to the prior probability for that class.$${c}_{k}={\displaystyle \sum _{j=1}^{P}{c}_{j|k}},$$ which is the total weighted number of occurrences of all tokens in class

*k*.

### Estimated Probability for Multivariate Multinomial Distribution

If predictor variable * j* has a conditional multivariate
multinomial distribution (see the

`DistributionNames`

property), the
software follows this procedure:The software collects a list of the unique levels, stores the sorted list in

`CategoricalLevels`

, and considers each level a bin. Each combination of predictor and class is a separate, independent multinomial random variable.For each class

*k*, the software counts instances of each categorical level using the list stored in`CategoricalLevels{`

.}`j`

The software stores the probability that predictor

in class`j`

has level`k`

*L*in the property`DistributionParameters{`

, for all levels in,`k`

}`j`

`CategoricalLevels{`

. With additive smoothing [2], the estimated probability is}`j`

$$P\left(\text{predictor}j=L|\text{class}k\right)=\frac{1+{m}_{j|k}(L)}{{m}_{j}+{m}_{k}},$$

where:

$${m}_{j|k}(L)={n}_{k}\frac{{\displaystyle \sum _{\{i:{y}_{i}=k\}}^{}I\{{x}_{ij}=L\}{w}_{i}^{}}}{{\displaystyle \sum _{\{i:{y}_{i}=k\}}^{}{w}_{i}^{}}},$$ which is the weighted number of observations for which predictor

*j*equals*L*in class*k*.*n*is the number of observations in class_{k}*k*.$$I\left\{{x}_{ij}=L\right\}=1$$ if

*x*=_{ij}*L*, and 0 otherwise.$${w}_{i}^{}$$ is the weight for observation

*i*. The software normalizes weights within a class so that they sum to the prior probability for that class.*m*is the number of distinct levels in predictor_{j}*j*.*m*is the weighted number of observations in class_{k}*k*.

## References

[1] Hastie, Trevor, Robert Tibshirani, and Jerome Friedman.
*The Elements of Statistical Learning: Data Mining, Inference, and
Prediction*. 2nd ed. Springer Series in Statistics. New York, NY:
Springer, 2009. https://doi.org/10.1007/978-0-387-84858-7.

[2] Manning, Christopher D., Prabhakar Raghavan, and Hinrich Schütze. *Introduction to Information Retrieval*, NY: Cambridge University Press, 2008.

## Extended Capabilities

### C/C++ Code Generation

Generate C and C++ code using MATLAB® Coder™.

Usage notes and limitations:

The

`predict`

function supports code generation.When you train a naive Bayes model by using

`fitcnb`

, the following restrictions apply.The value of the

`'DistributionNames'`

name-value pair argument cannot contain`'mn'`

.The value of the

`'ScoreTransform'`

name-value pair argument cannot be an anonymous function.

For more information, see Introduction to Code Generation.

## Version History

**Introduced in R2014b**

### R2023b: Naive Bayes models support standardization of kernel-distributed predictors

`fitcnb`

supports the standardization of predictors with kernel
distributions. That is, you can specify the `Standardize`

name-value
argument as `true`

when the `DistributionNames`

name-value argument includes at least one `"kernel"`

distribution. Naive
Bayes models include `Mu`

and `Sigma`

properties that
contain the means and standard deviations, respectively, used to standardize the predictors
before training. The properties are empty when `fitcnb`

does not perform
any standardization.

## See Also

## MATLAB Command

You clicked a link that corresponds to this MATLAB command:

Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.

Select a Web Site

Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .

You can also select a web site from the following list:

## How to Get Best Site Performance

Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.

### Americas

- América Latina (Español)
- Canada (English)
- United States (English)

### Europe

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)