Find if component reference model is protected
Find If Component Reference Model is Protected
Find whether or not the referenced model on the component is protected.
Create a new System Composer™ model and add a new component.
model = systemcomposer.createModel("archModel"); rootArch = get(model,"Architecture"); newComponent = addComponent(rootArch,"newComponent");
Create new Simulink® reference model and save.
newRef = new_system("newReference","Model"); save_system(newRef);
Protect the Simulink model reference.
Link the Simulink model to the component
Verify that the reference model linked to the component is protected.
flag = isProtected(newComponent)
flag = logical 1
flag — Whether referenced model on component is protected
true or 1 |
false or 0
Whether referenced model on component is protected, returned as a logical.
A System Composer architecture represents a system of components and how they interface with each other structurally and behaviorally. You can represent specific architectures using alternate views.
Different types of architectures describe different aspects of systems:
You can define parameters on the architecture level using the Parameter Editor.
A System Composer model is the file that contains architectural information, including components, ports, connectors, interfaces, and behaviors.
Perform operations on a model:
A System Composer model is stored as an SLX file.
|Create Architecture Model with Interfaces and Requirement Links|
A component is a nontrivial, nearly independent, and replaceable part of a system that fulfills a clear function in the context of an architecture. A component defines an architectural element, such as a function, a system, hardware, software, or other conceptual entity. A component can also be a subsystem or subfunction.
Represented as a block, a component is a part of an architecture model that can be separated into reusable artifacts. Transfer information between components with:
A port is a node on a component or architecture that represents a point of interaction with its environment. A port permits the flow of information to and from other components or systems.
There are different types of ports:
Connectors are lines that provide connections between ports. Connectors describe how information flows between components or architectures.
A connector allows two components to interact without defining the nature of the interaction. Set an interface on a port to define how the components interact.
A reference component is a component whose definition is a separate architecture model, Simulink behavior model, or Simulink subsystem behavior. A reference component represents a logical hierarchy of other compositions.
You can reuse compositions in the model using reference components. There are three types of reference components:
A parameter is an instance-specific value of a value type.
Parameters are available for inlined architectures and components. Parameters are also available for components linked to model references or architecture references that specify model arguments. You can specify independent values for a parameter on each component.
A subsystem component is a Simulink subsystem that is part of the parent System Composer architecture model.
Add Simulink subsystem behavior to a component to author a subsystem component in System Composer. You cannot synchronize and reuse subsystem components as Reference Component blocks because the component is part of the parent model.
A state chart diagram demonstrates the state-dependent behavior of a component throughout its state lifecycle and the events that can trigger a transition between states.
Add Stateflow® chart behavior to describe a component using state machines. You cannot synchronize and reuse Stateflow chart behaviors as Reference Component blocks because the component is part of the parent model.
Introduced in R2021b