tiled plots on two loops without overriding the succesive figures

I have arranged the tiled plots in the following way inside two loops so that the figures from the first loop don't over write the figures of the second loop. Is there any better way to do this? This code appears to work but I will like your opinion if there is a better way of doing this.

Is the tiledlayout and nexttile application properly applied here?

NP = 16; % 16 probes per page
[NRow, N_probe] = size(V_possible);

for k_page = 1: ceil(N_probe/NP)
    screensize = get( groot, 'Screensize' );
    figure('Position', screensize)
    tiledlayout('flow','TileSpacing', 'Compact', 'Padding', 'Compact');
    if k_page == ceil(N_probe/NP)
        nplot = N_probe-NP*(k_page-1);% plots per page, last page could be less than 20
    else
        nplot = NP;
    end
    
    for kk= 1:nplot
        nexttile(kk)
        i_probe = NP*(k_page-1)+kk;
        
        
        loglog(nraw1,sraw1,'-.b','LineWidth',1);
        hold on
        
        loglog(nraw2,sraw2,'-.r','LineWidth',1);
        hold on
        
        
    end %for kk
    
end %for k_page

for k_page = 1: ceil(N_probe/NP)
    screensize = get( groot, 'Screensize' );
    figure('Position', screensize)
    tiledlayout('flow','TileSpacing', 'Compact', 'Padding', 'Compact');
    if k_page == ceil(N_probe/NP)
        nplot = N_probe-NP*(k_page-1);% plots per page, last page could be less than 20
    else
        nplot = NP;
    end
    
    for kk= 1:nplot
        nexttile(kk)
        i_probe = NP*(k_page-1)+kk;
        
        
        loglog(nraw3,sraw3,'-.b','LineWidth',1);
        hold on      
        
        loglog(nraw4,sraw4,'-.r','LineWidth',1);
        hold on
        
        
    end %for kk
end %for k_page